I have gone through 1000 miles of engine treatment+Transmission fluid change followed by 4000 miles of Cerma oil ->Filter change -> then another 1000 miles. So I have posted on Veloster forum that I used to get 26.8 MPG at my best on 100% highway trips (cruising at 75~80mph). Here Read more
I bought a bottle of Cerma on the recommendation of a friend at work. My 2001 Pontiac Formula had a lifter tick that I was hoping to get rid of. After putting in the Cermax and letting the engine run for 5 minutes, the tick was GONE! He later asked me if my car had more power, but Read more
I've read this thread for a while and decided to buy some AT treatment and 2 engine treatments yesterday. But not for my Veloster. I bought a beater truck (165K miles) for hunting and use around the house so I'm going to treat that with CERMA because why not. I'm also putting an engine Read more
My Cerma Story #1) Treated a Chevy a week ago. Someone very close to me, I cannot disclose who, got out of the car today and removed some items from the back seat, pressed the all door lock button on the passenger side and went into a client’s office for an hour.  Read more
I put Cerma Trans in and have noticed the trans shifts better and the temp gauge is reading cooler.
– Drew (10/25/2012, 09:35 PM)
6/5/15: I wanted to let you know my 1997 Toyota is running like a top since I started using your products. I am ready to change to Cerma Oil and am looking forward to ongoing improvement. The transmission shifts like a dream and the power steering no longer "groans" at low speeds. Read more
1st attempt to test this Cerma engine treatment on my 01 Accord V6 - org 68,000mi on SEP-02 2015. Brand new Mobile 1 full synthetic oil w/ Honda genuine filter before engine treatment applied, this accord runs avg mpg 18 / 24. Engine seems quieter after 80+ miles on the road. -- Read more
I used the Cerma foam treatment in the following handguns: .44 revolver, .357 revolver.40 semi, .357 sig semi and AR 15 .223 rifle so far. I am very pleased with the results of all barrels. Next shooting session only required the use of bore snakes to clean the small amount of debris. Read more
I think we performed a pretty significant experiment with your product today. My training officer did not return to the office but I will get more information tomorrow. We took 2 identical roof cutting carbide chain saws and had the same operator on the same roof make cuts one after Read more
Reposted from http://www.amazon.com/Cerma-Gas-Ceramic-Engine-Treatment/dp/B00AZONLUC/ By Brad on February 25, 2015
This is the best stuff I've ever used. I did not buy from Amazon but bought the Engine Treatment direct from the manufacturer. Now that being said, this is the best Read more
Just received the engine treatment and it works perfectly :)
My car has more torque, sounds great it's also smoother running.
My vtec kicks @ 6k and pulls through all gears perfectly. I need to replace my timing chain and I'm sorry I didn't change it before using the cerma.
So Read more
I own a trucking company and have been amazed at the results of the Cerma Engine Treatment and Cerma Motor Oils. I purchased Cerma because my older Series 60 Detroit was smoking badly, particularly when off the throttle. Even though overhauled only about a year and a half ago, the Read more
I just wanted to tell you about my Volvo semi that I drive. It is a 2015 Volvo Day Cab with A/T. It now has 39,500 miles on it. I treated it at about 10K and fuel economy increased even though it was a new truck to about 4/10 mile per gallon. When the oil was changed by the company Read more
8/27/14 - FYI! I had my car at the dealer this morning for a recall service appt. My 2011 Fusion with 81k miles on the 2.5L 4 cyl duratec engine was "quieter then a brand new engine in any car found on the lot..." according to the service technician who worked on the car.
8/14/14 Read more
I recently SiC treated a 1100cc motor on a 1984 Honda v65 Sabre VF100S and began with these compression numbers:
Cylinder #1: 120/170 Cylinder #2 : 142/170 Cylinder #3 : 138/170 Cylinder #4 : 140/170
After treatment, compression improved significantly. My post-treatment Read more
Cerma Engine Treatment. My wife bought a brand new 2014 Jeep Grand Cherokee last September. She had approximately 15,000 miles on the engine when I added the Cerma Engine Treatment. After the suggested 3,000 miles I changed the oil and used CERMAX 5-20W oil. She drove an additional Read more
I've already used Cerma STM-3 Engine Treatment on 1 vehicle and plan to use this shipment to do a second. Great product, great support. I love this product, and keep buying it when I discover a friend or acquaintance who needs it too. Thanks! – Stephen Wild Post 2 (04/13/2012, Read more
I wanted to report your product results for my 2009 Kia Optima with 35k miles. I added a bottle to the automatic transmission and have experienced a much smoother shifting pattern. Otherwise not much to report.
I added one bottle to the engine oil and have noticed Read more
This post is a "give back" I hope to help a few with this one, as so many helped me with replies on my first post. I learned much. At that time I was asking about re-powering or rebuilding the b43 Onan in my well maintained '83 BMW 318i. The reason was that it smoked Read more
6/3/2015: John, I have been using the Cerma Evo grade oil in my 2012 Prius for over a year now an was thrilled to get 53-54 miles to the gallon. Recently, I just got lazy one day and took my Prius in to the Valvaline oil change and had them put in their top of the line fully synthetic Read more
Cerma makes everything run smoother. I was skeptical of Cerma at first, but decided to try it. For example, my wife owns a 2000 Jeep Wrangler. When we first bought the Jeep we were averaging about 16 to 17 miles per gallon. I put Cerma in the engine, transmission, transfer case, Read more
Just prior to winter in 2012, I used 1/3 an ounce of Cerma engine treatment in my 1999 Craftsman snow blower. In the past it was necessary to have the choke on and to let it run a bit before using, especially in really cold weather. Even at that, it sometimes took a couple attempts Read more
CERMA is the real deal! If you follow the instructions after applying product to your oil, you will notice less noise, better fuel economy, about 1.5 miles more per gallon! Add to your dirty oil with about 2k miles before you have to change it again. This stuff works, and works Read more
I am amazed at this product. I put Cerma STM-3 in my 2009 subaru imprezza and went from 33 mpg hwy. to 38 hwy! the engine seems to be so smooth you can't tell it is running! So then I put it in my 04 dodge hemi sport truck and went from 15.5 to 19.5 mpg hwy! unbelievable!! this stuff Read more
Engine Treatment: Added CERMA and gas mileage has increased and harmonics are much better. Love to drive my car more than ever. Bought a car with over 223,000 hard miles. Added CERMA and gas mileage has increased and harmonics are much better. Love to drive my car more than ever. Read more
Dear Great Cerma Product, I have just used the transmission and engine treatment. So Far So Good. I notice an improvement with the transmission, and the engine seems to be idling smother and faster. I expect to be most pleased with my investment on a 191K mile CHEVY Venture 3.4 van. Read more
Thank you Cerma! The day I put Cerma in my engine it smoothed out my choppy idle at 800rpm. And even today it is still getting 5.5mpg to 6.0 mpg driving to the Northwest and back to the Midwest a majority of the time. I added Cerma in at 825,000 miles, now truck has 1,016,000 miles. Read more