• Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More

I have gone through 1000 miles of engine treatment+Transmission fluid change followed by 4000 miles of Cerma oil ->Filter change -> then another 1000 miles. So I have posted on Veloster forum that I used to get 26.8 MPG at my best on 100% highway trips (cruising at 75~80mph). Here ...

Sungyoung Kim 1998 Ford Mustang V6 168,000 Miles Thursday, June 12, 2014

Just received the engine treatment and it works perfectly :)

My car has more torque, sounds great it's also smoother running.
My vtec kicks @ 6k and pulls through all gears perfectly. I need to replace my timing chain and I'm sorry I didn't change it before using the cerma.

So ...

James T. (UK) 2003 Type R Honda Civic EP3 with VTEC Engine and 114,500 miles Monday, March 10, 2014
2006 Chevy Equinox

Hello John,

My Cerma Story #1) Treated a Chevy a week ago. Someone very close to me, I cannot disclose who, got out of the car today and removed some items from the back seat, pressed the all door lock button on the passenger side and went into a client’s office for an hour.  ...

Ian Roe 2006 Chevy Equinox 6 cyl with 88,000 km Thursday, June 9, 2011
16” AR-15

I must admit that I tend to view products with skepticism however the proof was in the data. I saw a legitimate 200 fps gain in a 16” AR-15 that would be the equivalent of having a 20” barrel, as well as a legitimate 150 fps boost in a 40 cal Sig P-229R. Now when cleaning time came ...

Corey Vento- Police training officer Norwalk CT Police Department Tuesday, May 7, 2013
2001 Peterbilt

Heard of this product from a friend put it in my dads 2001 Peterbilt Generator after about 2 min of running it quieted down and I couldn't even tell it was running.. Can't wait to put it in the engine and see what kind of fuel mileage he gets. Great product very satisfied. – John ...

John Leckington 2001 Peterbilt Generator Wednesday, March 7, 2012

I put Cerma Trans in and have noticed the trans shifts better and the temp gauge is reading cooler.

– Drew (10/25/2012, 09:35 PM)

Drew Challenger RT Thursday, October 25, 2012
40 FT Meridian Yacht

The boat is going over 28 MPH. Granted clean bottom and props but I don’t believe it ever went over 26ish on this boat. It is a 40 FT Meridian Yacht weighing 17 tons. Top end speed was increased about 10% and that is before we start with the CERMAX Motor Oil.

Leigh Overland 40 FT Meridian Yacht Wednesday, June 4, 2014
2004 Ford F350 6.0

Works. 'Lil spendy but damn worked. Bought In april 2014 used in my '04 6.0 F350 4x4 an put some in my dad's dodge '05 3500 5.9 he even commented + on this, wish could afford more often tried others this works the best for me an my 6.0. Great product the Diesel fuel treatment better ...

D. Watson 2004 Ford F350 6.0 Tuesday, March 8, 2016
2004 Ford Ranger

When I first went to use this product, I was a bit skeptical, I had an issue with my truck starting. I had tried every chemical to run through the gas tank claiming to "fix" rough starts, all of them failing miserably. I ran the Cerma fuel treatment through and sure enough, next day, ...

CJ 2004 Ford Ranger, 4.0L, non-turbo, 4 spd automatic 4X4 Sunday, May 3, 2015

6/3/2015: John, I have been using the Cerma Evo grade oil in my 2012 Prius for over a year now an was thrilled to get 53-54 miles to the gallon. Recently, I just got lazy one day and took my Prius in to the Valvaline oil change and had them put in their top of the line fully synthetic ...

Steve A. (Cincinnati) 2012 Prius (58 MPG) Wednesday, June 3, 2015
BMW 318i

Hi everyone!

This post is a "give back" I hope to help a few with this one, as so many helped me with replies on my first post. I learned much. At that time I was asking about re-powering or rebuilding the b43 Onan in my well maintained '83 BMW 318i. The reason was that it smoked ...

Mike Wentz '83 BMW 318i Friday, August 7, 2009
2011 Ford Fusion SE

8/27/14 - FYI! I had my car at the dealer this morning for a recall service appt. My 2011 Fusion with 81k miles on the 2.5L 4 cyl duratec engine was "quieter then a brand new engine in any car found on the lot..." according to the service technician who worked on the car.

8/14/14 ...

Douglas E. Immediate improvement! - 2011 Ford Fusion SE Sunday, October 11, 2015
Myrtle Beach Metro Cab

Update: My 2004 TC now has 349,000 miles. At 288,000. It was using a qt of oil every 500 miles now it uses a qt at 4,000. This van has another 100,000 left easy! It runs great and is the best running cab in Myrtle Beach. Thank You Cerma!

Original: Just finished 4800 miles on ...

Wade W. Myrtle Beach Metro Cab Friday, March 25, 2016

Just prior to winter in 2012, I used 1/3 an ounce of Cerma engine treatment in my 1999 Craftsman snow blower. In the past it was necessary to have the choke on and to let it run a bit before using, especially in really cold weather. Even at that, it sometimes took a couple attempts ...

Darrell Hails 1999 Craftsman 5 H.P., 22 inch Dual Stage Snow Blower, Model C950-52105-1 Thursday, October 31, 2013

Hello,
Just want to let you know of the positive results I have had so far: 2300 miles since Cerma was added to crankcase; oil consumption has been cut in half, from 4 quarts per month down to 2 quarts per month; slight mileage increase, about 1 mile per gallon more. Compression ...

Scott A. 2002 Nissan Altima 2.5L Wednesday, June 11, 2014
2015 Volvo Day Cab

I just wanted to tell you about my Volvo semi that I drive. It is a 2015 Volvo Day Cab with A/T. It now has 39,500 miles on it. I treated it at about 10K and fuel economy increased even though it was a new truck to about 4/10 mile per gallon. When the oil was changed by the company ...

Chad S. 2015 Volvo Day Cab with A/T Tuesday, September 29, 2015

I've already used Cerma STM-3 Engine Treatment on 1 vehicle and plan to use this shipment to do a second. Great product, great support. I love this product, and keep buying it when I discover a friend or acquaintance who needs it too. Thanks! – Stephen Wild Post 2 (04/13/2012, ...

Stephen Wild Jeep Grand Cherokee Friday, April 13, 2012

In my application, 1991 BMW 750i 5.0L 12 cylinder, I was mainly trying to correct annoying hydraulic lifter noise without having to replace any lifters. The Cerma product worked almost immediately to quiet all noisy lifters and they have remained quiet for the last 30K miles on an ...

Mark C. McCafferty, P.E. 1991 BMW 750i 5.0L 12 cylinder Tuesday, February 18, 2014
Nedal

Would recommend this to anybody who is looking to keep their engine long lasting no matter how many miles is on it. Already used on three of the four cars in our household and have noticed a smoother sound to the engine as well as increased gas mileage on each tank at least getting ...

Nedal Excellent Product Wednesday, March 6, 2013
2003 Ford F250

The best. Powered up my 12 year old truck -- it feels like new. I have a Ford F250, 2003 with 200,000.00 miles and in good shape, but after I used this product I felt the change -- more power, quieter, faster to respond. I feel like I have a new truck. I also did the transmission, ...

Giovanni 2003 Ford F250 Thursday, January 21, 2016

Before using Cerma, this car, a work car with 160K miles, would jerk every time it changed gears when you drive and the water temperature would be pointed a little over half way up the temperature gauge. I was a little skeptical before but kept reading the testimonials and watching ...

Tuan H. 2002 Honda Accord EX V6 Tuesday, July 19, 2016
Dodge Ram 250

Dear Cerma, I started using your products in the summer of 2013. I travel all over the country in my 1991 Dodge D250 two wheel drive with a 5.9 L Cummins turbo diesel. I have a topper on it and drive between 57 and 60 mph when on the highway. I always fuel up the same way and ...

Tom C. Dodge Ram 250 Monday, October 26, 2015

I am writing you today to let you know how pleased I am with your product (Cerma). I have seen many products make many claims and usually there is a lot more fluff than there is results. I am the director of sales for a 500 Million dollar a year company in Minneapolis Minnesota, so ...

Jay Erickson - Prior Lake Minnesota 1995 Isuzu Rodeo with 130,000 miles Thursday, October 31, 2013
Toro Push Mower

GREAT product I use CERMA in EVERYTHING from my TORO push mower to both my Chevrolet vehicles with GREATLY improved gas mileage & lawn mower that runs like a "swiss watch" As long as CERMA is around I will be a Loyal customer, Thanks!

Re-posted from General Testimonials Aug 22/2010 ...

Anonymous Toro Push Mower Sunday, August 22, 2010
Cerma Attends Auto Fest with Josh Borne

For a freestyle stunt rider, "heat is the biggest problem for bikes”. "Took me some time to test the product in the Kawasaki, but finally was able to try it out....definitely amazed!!! ... Dropped engine running temp by almost 20 degrees.” -- Josh Borne

Josh Borne is a championship ...

Josh Borne - Professional Freestyle Extreme Athlete Cerma Attends Auto Fest with Josh Borne Monday, November 30, 2015
Subaru Imprezza

I am amazed at this product. I put Cerma STM-3 in my 2009 subaru imprezza and went from 33 mpg hwy. to 38 hwy! the engine seems to be so smooth you can't tell it is running! So then I put it in my 04 dodge hemi sport truck and went from 15.5 to 19.5 mpg hwy! unbelievable!! this stuff ...

Brent Richards 2009 Subaru Imprezza and 04 Dodge Hemi Sport Truck Tuesday, September 11, 2012

So...I just got the oil changed to Cerma 5W30 and could feel a huge difference just starting the car up. Engine vibration in the pedal has gone almost to zero and the acceleration feels smoother. The best way to describe how it feels is by watching the test video that john put up ...

CH3mist - Veloster Forum Member Hyundai Veloster Saturday, February 1, 2014
AUD$ 130.00
CERMA ENGINE TREATMENT FOR GASOLINE OR DIESEL...
  • Save 5%
AUD$ 375.00 AUD$ 357.50
CERMA ENGINE TREATMENT DIESEL TRUCKS / SEMIS /...
AUD$ 87.00
CERMA FOR AUTOMATIC TRANSMISSIONS Cerma...
AUD$ 90.00
CERMA MOTORCYCLE TREATMENT Cerma STM-3®...
AUD$ 71.50
Cerma Blue Ice works in all A/C and Regirgeration...