• Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More
2001 Honda Accord V6

1st attempt to test this Cerma engine treatment on my 01 Accord V6 - org 68,000mi on SEP-02 2015. Brand new Mobile 1 full synthetic oil w/ Honda genuine filter before engine treatment applied, this accord runs avg mpg 18 / 24. Engine seems quieter after 80+ miles on the road. -- ...

Spectacular Motoring 2001 Honda Accord V6 Thursday, September 3, 2015
2015 Volvo Day Cab

I just wanted to tell you about my Volvo semi that I drive. It is a 2015 Volvo Day Cab with A/T. It now has 39,500 miles on it. I treated it at about 10K and fuel economy increased even though it was a new truck to about 4/10 mile per gallon. When the oil was changed by the company ...

Chad S. 2015 Volvo Day Cab with A/T Tuesday, September 29, 2015
40 FT Meridian Yacht

The boat is going over 28 MPH. Granted clean bottom and props but I don’t believe it ever went over 26ish on this boat. It is a 40 FT Meridian Yacht weighing 17 tons. Top end speed was increased about 10% and that is before we start with the CERMAX Motor Oil.

Leigh Overland 40 FT Meridian Yacht Wednesday, June 4, 2014
Chevy Camarom RS

I put it in the engine oil and transmission. Transmission stopped slipping on very first drive home from work. I could not believe it!

Anonymous 1991 Chevy Camarom RS with 213,000 miles on it Saturday, July 31, 2010

Hi John. I decided to try Cerma and my first use was in my daughter's 2002 Mazda Tribute with about 100,000 kms on it. It was running a bit rough and mileage was low 20's per gallon. I treated it and then we went on a family trip, loaded with 4 adults and full of golf clubs and ...

Tom D. 2002 Mazda Tribute Tuesday, February 18, 2014
2006 Mercedes E350 4Matic

6/5/15: I wanted to let you know my 1997 Toyota is running like a top since I started using your products. I am ready to change to Cerma Oil and am looking forward to ongoing improvement. The transmission shifts like a dream and the power steering no longer "groans" at low speeds. ...

Raul Y. 2006 Mercedes E350 4Matic Friday, June 5, 2015
Freightliner 12.7 Series 60 Detroit

Thank you Cerma! The day I put Cerma in my engine it smoothed out my choppy idle at 800rpm. And even today it is still getting 5.5mpg to 6.0 mpg driving to the Northwest and back to the Midwest a majority of the time. I added Cerma in at 825,000 miles, now truck has 1,016,000 miles. ...

Vincent J. Freightliner 12.7 Series 60 Detroit Monday, October 19, 2015

So...I just got the oil changed to Cerma 5W30 and could feel a huge difference just starting the car up. Engine vibration in the pedal has gone almost to zero and the acceleration feels smoother. The best way to describe how it feels is by watching the test video that john put up ...

CH3mist - Veloster Forum Member Hyundai Veloster Saturday, February 1, 2014
1998 Dodge Diesel Pickup

I treated my 1998 Dodge Diesel Pickup with 6 oz Cerma Engine| Treatment and the engine smoothed up and has much more power. I am very satisfied with this. I also put 2 oz in the transmission. The transmission was shifting rough and had a slight leak. After adding the Cerma STM-3 ...

Charles Penner 1998 Dodge Diesel Pickup Wednesday, February 29, 2012
2010 BMW 550i

Hi, After 2000 miles my 2010 BMW 550i it runs better, no engine noise and 2-3 more MPG. Thanks ! -- Stephen K.

Steven K. 2010 BMW 550i Tuesday, March 8, 2016
Kia Optima

Good afternoon,
I wanted to report your product results for my 2009 Kia Optima with 35k miles. I added a bottle to the automatic transmission and have experienced a much smoother shifting pattern. Otherwise not much to report.

I added one bottle to the engine oil and have noticed ...

Kevin Udell 2009 Kia Optima with 35k miles Thursday, August 5, 2010
1990 Mitsubishi Montero

What the ......, this stuff actually works!
Here's the story...1990 Mitsubishi Montero that I bought new. First it was the unofficial Cheerleading Team vehicle for my daughter and now it is the unofficial Baseball Team vehicle for my son. Currently at 144,853 miles. I was turned ...

Chris C. 1990 Mitsubishi Montero Tuesday, April 7, 2015

I have gone through 1000 miles of engine treatment+Transmission fluid change followed by 4000 miles of Cerma oil ->Filter change -> then another 1000 miles. So I have posted on Veloster forum that I used to get 26.8 MPG at my best on 100% highway trips (cruising at 75~80mph). Here ...

Sungyoung Kim 1998 Ford Mustang V6 168,000 Miles Thursday, June 12, 2014
Ruger .204 Rifle

I have been using Cerma products for close to two years now in my all my vehicles, tractors, excavator and dump truck. I am totally impressed with all of the products! As a result of my confidence in these products, I thought I would try the firearm foam and grease in my rifles that ...

Paul M. Ruger .204 Rifle Tuesday, February 21, 2017
ar15

Cerma Gun Lube. I followed the instructions as directed. I shot a 30 round magazine as fast as I could pull the trigger out of my AR-15. After shooting the rounds I accidentally brushed the barrel of my gun with my forearm and instinctively pulled it away so not to get burned. ...

Dan P. Colt AR-15 Tuesday, May 5, 2015
Bagger Motorcycle

December 2007 - I treated my 2002 Harley Davidson Custom Bagger motorcycle on the trip to Arkansas. The main thing that I noticed is the fuel mileage increase of at least 6 mpg. I was very happy as I was driving hard at speeds of at least 75-80 mph all day long on a 1700 mile round ...

Bob M. 2002 Harley Davidson Custom Bagger Motorcycle Tuesday, December 11, 2007

I've already used Cerma STM-3 Engine Treatment on 1 vehicle and plan to use this shipment to do a second. Great product, great support. I love this product, and keep buying it when I discover a friend or acquaintance who needs it too. Thanks! – Stephen Wild Post 2 (04/13/2012, ...

Stephen Wild Jeep Grand Cherokee Friday, April 13, 2012
2015 Subaru Outback

Unbelievable MPG increase!! My new 2015 subaru outback 3000 miles had 27.4 miles per gallon. I added this to the oil chamber under the hood, reved the engine up to 4000 rpm's for a few minutes, then drove it hard for 30 minutes on streets and freeway mostly. It's been 8 months and ...

Jennifer V. 2015 Subaru Outback Saturday, May 28, 2016
5.7l VZ Commdore

i bought a ls1 5.7l VZ Commodore Utility at auction driving home the check engine light was on ( engine code low oil pressure) and the oil light came on and the engine had a knocking / ticking sound in the motor yet oil level was normal i knew i was in for a big $ repair job on engine. ...

Robert K. 5.7l VZ Commodore Tuesday, September 22, 2015
Motorcycle

I was your biggest skeptic. I bought the Cerma Engine Treatment because of how passionate you were about the product. It has been sitting on my toolbox for months. I put Ii t in the bike today and within an hour I noticed it working. Wish I hadn’t waited so long. What have you ...

Joe M. Joe M. Branford, CT Sunday, July 17, 2016
2006 Chevy Equinox

Hello John,

My Cerma Story #1) Treated a Chevy a week ago. Someone very close to me, I cannot disclose who, got out of the car today and removed some items from the back seat, pressed the all door lock button on the passenger side and went into a client’s office for an hour.  ...

Ian Roe 2006 Chevy Equinox 6 cyl with 88,000 km Thursday, June 9, 2011

Wanted to update on the Lancer. We are 2k miles into the cerma max 5w40 oil and I pulled the dipstick... No joke it looks like I just did the oil change. I'll post up pics when I get a chance. As a reminder the Lancer has 111k so I expected to see some dark oil. But it was completely ...

Turbomatte Mitsubishi Lancer Thursday, June 12, 2014
1991 Ford Tempo

I am a journeyman machinist/machinery mechanic automotive enthusiasts with 40 years of formal and trade experience.presently I am rebuilding/upgrading a 1991 ford tempo and writing a book.during upgrade research i found about Cerma.as it is a coating, i was EXTREMELY concerned about ...

Bill 1991 Ford Tempo Thursday, September 15, 2011
1987 BMW M6

Hi John, I want you to know that the Cerma Transmission Treatment fixed my 25 year old BMW M6 manual tranny, which did not want to go into first gear much before. This appears to be a known issue with those Getrag gearboxes. The Cerma STM-3 Engine Treatment made this same vehicle ...

Glenn 1987 BMW M6 and 1989 Chrysler Dynasty Wednesday, February 29, 2012

Did a test session earlier, the initial run since adding the CERMAX 5W40 oil plus the manual transmission treatment.

First thing I noticed when shifting to second was how much easier the gear went in, I actually said "Wowwww" out loud.

Second thing is that the butt dyno felt ...

Veloster Forum Member Hyundai Veloster Thursday, February 6, 2014
2002 Ford F-150

Products Used Cerma Engine Treatment, Cerma Motor Oil:
I purchased the Diesel Engine treatment after reading about it and its possible benefits. I am so happy I did. It literally did reduce vibration within seconds of pouring it in my engine. It also slightly reduced the normal ...

Vance W. 2002 Ford F-150 Thursday, August 27, 2015

I put Cerma Trans in and have noticed the trans shifts better and the temp gauge is reading cooler.

– Drew (10/25/2012, 09:35 PM)

Drew Challenger RT Thursday, October 25, 2012
AUD$ 130.00
CERMA ENGINE TREATMENT FOR GASOLINE OR DIESEL...
  • Save 5%
AUD$ 375.00 AUD$ 357.50
CERMA ENGINE TREATMENT DIESEL TRUCKS / SEMIS /...
AUD$ 87.00
CERMA FOR AUTOMATIC TRANSMISSIONS Cerma...
AUD$ 90.00
CERMA MOTORCYCLE TREATMENT Cerma STM-3®...
AUD$ 71.50
Cerma Blue Ice works in all A/C and Regirgeration...