• Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More
2015 Volvo Day Cab

I just wanted to tell you about my Volvo semi that I drive. It is a 2015 Volvo Day Cab with A/T. It now has 39,500 miles on it. I treated it at about 10K and fuel economy increased even though it was a new truck to about 4/10 mile per gallon. When the oil was changed by the company ...

Chad S. 2015 Volvo Day Cab with A/T Tuesday, September 29, 2015
2004 silverado 5.3 v8

O ahhhhhhh mazing :) At first glance, i thought the price was a little crazy.but some in-the-know car guys that i know convinced me to give it a try, and i probably shouldn't have tried it on my only vehicle, but what the hell :D. my vehicle wasn't in bad shape (2004 silverado 5.3 ...

Stephen 2004 silverado 5.3 v8 Thursday, May 23, 2013
Subaru Imprezza

I am amazed at this product. I put Cerma STM-3 in my 2009 subaru imprezza and went from 33 mpg hwy. to 38 hwy! the engine seems to be so smooth you can't tell it is running! So then I put it in my 04 dodge hemi sport truck and went from 15.5 to 19.5 mpg hwy! unbelievable!! this stuff ...

Brent Richards 2009 Subaru Imprezza and 04 Dodge Hemi Sport Truck Tuesday, September 11, 2012
2004 Nissan Maxima

I put both transmission and engine treatment in our Maxima last night,drove about 35 miles. I noticed a smoother running engine right away. Drove another 50 miles today, gas mileage is up about 2 miles a gallon. Will switch to Cerma Oil in about 3k miles. -- Sherman J. Round Rock, ...

Sherman J. 2004 Nissan Maxima Monday, June 22, 2015
2001 Honda Accord V6

1st attempt to test this Cerma engine treatment on my 01 Accord V6 - org 68,000mi on SEP-02 2015. Brand new Mobile 1 full synthetic oil w/ Honda genuine filter before engine treatment applied, this accord runs avg mpg 18 / 24. Engine seems quieter after 80+ miles on the road. -- ...

Spectacular Motoring 2001 Honda Accord V6 Thursday, September 3, 2015
1990 560 SEC Benz

I never bother writing reviews, however, this product is FANTASTIC!! 560 SEC Benz with 113k miles, about 30k since valves...UNBELIEVABLE!! Cold start on 1st turn of starter EVERY time, not the 4-6 turns... After the results with oil treatment, did tranny, power steering and fuel ...

Pdidheon 1990 560 SEC Benz Monday, March 23, 2015
Intake

So here we are at 50,000 miles. Picture here is the cleanest intake valves ever seen on a GDI motor, by two EQUUS techs with 35 years experience between them. CERMA works. Way beyond anything.... Those of you contemplating its use, what are you waiting for. The SS turbo is going ...

Peter K. (aka Gaijii) From Veloster Forum -- CERMA Treatments/Oil/Lubricants: For the good of the order Sunday, November 1, 2015
Series 60 Detroit

I own a trucking company and have been amazed at the results of the Cerma Engine Treatment and Cerma Motor Oils. I purchased Cerma because my older Series 60 Detroit was smoking badly, particularly when off the throttle. Even though overhauled only about a year and a half ago, the ...

Tom Hoover Series 60 Detroit Sunday, April 15, 2012
Bike

Thanks for the emails, i am getting better gas millage in my bike, was at 39 MPG. I am now getting 43 MPG after 300 miles of riding on Cerma! --Greg J. – Wolcott, CT

Greg J. Saturday, June 25, 2016
Lexus IS

John,
I applied the product to my Lexus, and I could tell and real difference in power. If I can get my right foot to cooperate, I bet I’ll see fuel savings. I just wanted to let you know. REALLY COOL! --Dennis B
received via e-mail at cermaceo@gmail.com (Nov. 12 2010)

Dennis B 2007 Lexus IS 350 Friday, November 12, 2010

Purchased a 1990 Buick Reatta with 143,000 miles on it. It runs great and can only run better with the Cerma products I just purchased (Cerma Engine Value Package) and based on the success of your products in my other vehicles! 1997 Toyota Avalon, 1991 Mercedes 420SEL, 1988 Cadillac ...

Raul Y. 1990 Buick Reatta Friday, June 10, 2016
Ford Escape

We drive a 2005 Ford Escape that we leased new. The sticker for mileage said 19 city 22 hwy and we got an average of 20.5. We tried the cerma with stm3 over 2 years ago and have treated the engine oil 2 oz of STM-3™ metal treatment in the transmission 2 oz, STM-3™ in the differential ...

Mike and Dea Shoars 2005 Ford Escape Saturday, March 8, 2008
Cerma Attends Auto Fest with Josh Borne

For a freestyle stunt rider, "heat is the biggest problem for bikes”. "Took me some time to test the product in the Kawasaki, but finally was able to try it out....definitely amazed!!! ... Dropped engine running temp by almost 20 degrees.” -- Josh Borne

Josh Borne is a championship ...

Josh Borne - Professional Freestyle Extreme Athlete Cerma Attends Auto Fest with Josh Borne Monday, November 30, 2015

My fiat now runs like a 6cyl. Boy has it got power. It now beats lots of 6cyl. I did my engine using EVO oil and fuel treatment. -- Bill D.

Bill Diel Fiat 500 Sport Monday, January 11, 2016
2002 Toyota Sienna Minivan

I used Cerma STM-3 Engine Treatment in my 2002 Toyota Sienna Minivan; Fuel mileage went up from 260 mile per tank to 355 miles extremely happy with gas saved. I also used Cerma in my 2000 Dodge Caravan SE; Fuel mileage went up from 245 miles per full tank to 350 miles now. Lastly, ...

OKTAY TUZER 2002 Toyota Sienna Minivan Wednesday, March 7, 2012
Diesel Semi-Truck

Just a quick note to tell you what Cerma has done for my trucks.

We put Cerma in the whole system of one truck with 798,000 miles, (engine {470 Detroit}, transmission, and both rear axles). Within 50 miles 95% vibrations were gone, stack smoke was all but gone, and pulling first ...

Everett Schaffer Co Owner E & C Transport, Inc / Terminal 74 for Ace Transportation Houma, Louisiana Sunday, January 28, 2007
2008 Ford Transit Diesel 2.4Ltr Turbo Van with 155,000km

Update from NZ on Cerma: Hello, December last year I purchased several products from you. I changed my oil ran the vehicle for a while the added Cerma. I make a regular trip up a rather steep and long hill, a 3km climb. When I purchased the diesel van it would pull up this hill ...

Glen M. 2008 Ford Transit Diesel 2.4Ltr Turbo Van with 155,000km Saturday, March 21, 2015
2001 Peterbilt

Heard of this product from a friend put it in my dads 2001 Peterbilt Generator after about 2 min of running it quieted down and I couldn't even tell it was running.. Can't wait to put it in the engine and see what kind of fuel mileage he gets. Great product very satisfied. – John ...

John Leckington 2001 Peterbilt Generator Wednesday, March 7, 2012

In my application, 1991 BMW 750i 5.0L 12 cylinder, I was mainly trying to correct annoying hydraulic lifter noise without having to replace any lifters. The Cerma product worked almost immediately to quiet all noisy lifters and they have remained quiet for the last 30K miles on an ...

Mark C. McCafferty, P.E. 1991 BMW 750i 5.0L 12 cylinder Tuesday, February 18, 2014
2002 Mack Semi

I own a 2002 Mack semi. My truck started using 2 to 3 gallons of oil per week. I was told I needed to rebuild the motor, rings, sleeves, rod, and main bearings. The motor had an excessive amount of blow by. I added Cerma and followed the instructions carefully. Over the next three ...

deliveredtrucking@ 2002 Mack Semi Thursday, April 23, 2015
Honda Pilot 2004 3.5L

Several tens of thousands of miles ago, I found out about Cerma Engine Treatment -- yep, I was skeptical. But talking with these wonderful folks convinced me to try it. After adding to the oil, I noticed a problem of concern: at the stop light, my car was so quiet i couldn't hear ...

John T. Honda Pilot 2004 3.5L Tuesday, February 6, 2018
ReachMe

CERMA is the real deal! If you follow the instructions after applying product to your oil, you will notice less noise, better fuel economy, about 1.5 miles more per gallon! Add to your dirty oil with about 2k miles before you have to change it again. This stuff works, and works ...

ReachMe Happy Customer Sunday, September 28, 2014
Carbide Chain Saw

I think we performed a pretty significant experiment with your product today. My training officer did not return to the office but I will get more information tomorrow. We took 2 identical roof cutting carbide chain saws and had the same operator on the same roof make cuts one after ...

Chief Doug Carbide Chain Saws Wednesday, April 1, 2015

Before using Cerma, this car, a work car with 160K miles, would jerk every time it changed gears when you drive and the water temperature would be pointed a little over half way up the temperature gauge. I was a little skeptical before but kept reading the testimonials and watching ...

Tuan H. 2002 Honda Accord EX V6 Tuesday, July 19, 2016

I've already used Cerma STM-3 Engine Treatment on 1 vehicle and plan to use this shipment to do a second. Great product, great support. I love this product, and keep buying it when I discover a friend or acquaintance who needs it too. Thanks! – Stephen Wild Post 2 (04/13/2012, ...

Stephen Wild Jeep Grand Cherokee Friday, April 13, 2012
Veloster

I'm only 2 days into the treatment with 22k miles on the odo only 100 miles driven since treated and already noticing a big difference when driving it on the highway and even in the city. I must say I've been made a believer. The car feels more normal and definitely feels like it ...

Sly4c Veloster Turbo Tuesday, February 23, 2016
2005 Chrysler Sebring

Vehicle: 2005 Chrysler Sebring with 54,000 miles.
Product Used: Cerma Engine, Cerma Transmission, and Cerma Blue Ice
Was skeptical despite enthusiastic recommendation from a mechanic friend. Too much snake oil on the market. No longer. Single parent with 3 teen drivers and a fleet ...

Don S. 2005 Chrysler Sebring Saturday, July 18, 2015
AUD$ 130.00
CERMA ENGINE TREATMENT FOR GASOLINE OR DIESEL...
  • Save 5%
AUD$ 375.00 AUD$ 357.50
CERMA ENGINE TREATMENT DIESEL TRUCKS / SEMIS /...
AUD$ 87.00
CERMA FOR AUTOMATIC TRANSMISSIONS Cerma...
AUD$ 90.00
CERMA MOTORCYCLE TREATMENT Cerma STM-3®...
AUD$ 71.50
Cerma Blue Ice works in all A/C and Regirgeration...