• Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More
2001 Toyota Avalon

I've read this thread for a while and decided to buy some AT treatment and 2 engine treatments yesterday. But not for my Veloster. I bought a beater truck (165K miles) for hunting and use around the house so I'm going to treat that with CERMA because why not. I'm also putting an engine ...

TheBlackBass 2001 Toyota Avalon Tuesday, February 23, 2016
Jeep Wrangler

Cerma makes everything run smoother. I was skeptical of Cerma at first, but decided to try it. For example, my wife owns a 2000 Jeep Wrangler. When we first bought the Jeep we were averaging about 16 to 17 miles per gallon. I put Cerma in the engine, transmission, transfer case, ...

Rich Wilson 2000 Jeep Wrangler and 2005 Honda VTX Wednesday, August 18, 2010
BMW 318i

Hi everyone!

This post is a "give back" I hope to help a few with this one, as so many helped me with replies on my first post. I learned much. At that time I was asking about re-powering or rebuilding the b43 Onan in my well maintained '83 BMW 318i. The reason was that it smoked ...

Mike Wentz '83 BMW 318i Friday, August 7, 2009
Mitsubishi Challenger

Hullo John,
I bought 1 bottle of Cerma STM-3 Engine Treatment and 1 bottle of Cerma STM-3 Automatic Transmission Treatment from you in May 2008. I treated my Mitsubishi Challenger(see attachment) 4x4 engine which is a 3Ltr V6 in the engine and the transmission. I followed your ...

J Wulf Mitsubishi Challenger Sunday, February 8, 2009
2007 Chevy Colorado

Reposted from http://www.amazon.com/Cerma-Gas-Ceramic-Engine-Treatment/dp/B00AZONLUC/ By Brad on February 25, 2015

This is the best stuff I've ever used. I did not buy from Amazon but bought the Engine Treatment direct from the manufacturer. Now that being said, this is the best ...

Brad 2007 Chevy Colorado Friday, May 15, 2015

Bought it used in February, added the motor treatment as I left the dealer. Have averaged 41mpg since I bought it, 18% improvement over the highway rating of 35. (I commute with a total of 3 stop signs or stop lights on the way to work) Here is a copy of each fill-up since new ...

Mitch Jewett 2016 Toyota Camry LE 4 cylinder Thursday, August 9, 2018
Toro Push Mower

GREAT product I use CERMA in EVERYTHING from my TORO push mower to both my Chevrolet vehicles with GREATLY improved gas mileage & lawn mower that runs like a "swiss watch" As long as CERMA is around I will be a Loyal customer, Thanks!

Re-posted from General Testimonials Aug 22/2010 ...

Anonymous Toro Push Mower Sunday, August 22, 2010
Intake

So here we are at 50,000 miles. Picture here is the cleanest intake valves ever seen on a GDI motor, by two EQUUS techs with 35 years experience between them. CERMA works. Way beyond anything.... Those of you contemplating its use, what are you waiting for. The SS turbo is going ...

Peter K. (aka Gaijii) From Veloster Forum -- CERMA Treatments/Oil/Lubricants: For the good of the order Sunday, November 1, 2015

I put Cerma Trans in and have noticed the trans shifts better and the temp gauge is reading cooler.

– Drew (10/25/2012, 09:35 PM)

Drew Challenger RT Thursday, October 25, 2012
1993 Mustang Motor in a 1993 Miata

My car has a 1993 mustang motor and 5 speed transmission in a 1993 miata. I put both the engine additive and the gas treatment in the car at nearly the same time. The car definitely runs more smoothly. Throttle response is much improved. Oil pressure is up 5 lbs. I am very pleased. ...

J. Dwight 1993 Mustang Motor in a in a 1993 Miata Saturday, October 5, 2013
Ken's Automotive Services

Cerma lubrication is an advanced metal treatment that works great to reduce heat and friction in engines , drive trains and A/C compressors. The engines, drive trains, A/C compressors we have installed it in run much quieter, smoother and cooler! We would highly recommend it to anyone ...

Ken Faurot Owner: Ken's Automotive Services Wednesday, March 7, 2012
Subaru Imprezza

I am amazed at this product. I put Cerma STM-3 in my 2009 subaru imprezza and went from 33 mpg hwy. to 38 hwy! the engine seems to be so smooth you can't tell it is running! So then I put it in my 04 dodge hemi sport truck and went from 15.5 to 19.5 mpg hwy! unbelievable!! this stuff ...

Brent Richards 2009 Subaru Imprezza and 04 Dodge Hemi Sport Truck Tuesday, September 11, 2012

I have gone through 1000 miles of engine treatment+Transmission fluid change followed by 4000 miles of Cerma oil ->Filter change -> then another 1000 miles. So I have posted on Veloster forum that I used to get 26.8 MPG at my best on 100% highway trips (cruising at 75~80mph). Here ...

Sungyoung Kim 1998 Ford Mustang V6 168,000 Miles Thursday, June 12, 2014

This product saved me from loosing the use of my furnace for a week in December, I was leaving my home in north IA. I heard a strange noise from the basement and went to investigate, it sounded like a bad bearing, I opened the case of the furnace and it got louder, shut furnace off ...

James, VAS-PRO 11 year old furnace Thursday, July 26, 2018

Before using Cerma, this car, a work car with 160K miles, would jerk every time it changed gears when you drive and the water temperature would be pointed a little over half way up the temperature gauge. I was a little skeptical before but kept reading the testimonials and watching ...

Tuan H. 2002 Honda Accord EX V6 Tuesday, July 19, 2016
Ruger .204 Rifle

I have been using Cerma products for close to two years now in my all my vehicles, tractors, excavator and dump truck. I am totally impressed with all of the products! As a result of my confidence in these products, I thought I would try the firearm foam and grease in my rifles that ...

Paul M. Ruger .204 Rifle Tuesday, February 21, 2017
WV Passat 2001

Great product, Works as advertised! Used on 4 cylinder WV Passat 2001 (Diesel) and 2011 Kia Forte (Gasoline). After treating the engines with this product and driving 30 miles the cars became quieter. In addition, the engine's operating temperature decreased and after couple of months ...

Gi R. WV Passat 2001 Saturday, November 30, 2013

My fiat now runs like a 6cyl. Boy has it got power. It now beats lots of 6cyl. I did my engine using EVO oil and fuel treatment. -- Bill D.

Bill Diel Fiat 500 Sport Monday, January 11, 2016
2006 Mercedes E350 4Matic

6/5/15: I wanted to let you know my 1997 Toyota is running like a top since I started using your products. I am ready to change to Cerma Oil and am looking forward to ongoing improvement. The transmission shifts like a dream and the power steering no longer "groans" at low speeds. ...

Raul Y. 2006 Mercedes E350 4Matic Friday, June 5, 2015
Series 60 Detroit

I own a trucking company and have been amazed at the results of the Cerma Engine Treatment and Cerma Motor Oils. I purchased Cerma because my older Series 60 Detroit was smoking badly, particularly when off the throttle. Even though overhauled only about a year and a half ago, the ...

Tom Hoover Series 60 Detroit Sunday, April 15, 2012
Dodge Ram 250

Dear Cerma, I started using your products in the summer of 2013. I travel all over the country in my 1991 Dodge D250 two wheel drive with a 5.9 L Cummins turbo diesel. I have a topper on it and drive between 57 and 60 mph when on the highway. I always fuel up the same way and ...

Tom C. Dodge Ram 250 Monday, October 26, 2015
1990 560 SEC Benz

I never bother writing reviews, however, this product is FANTASTIC!! 560 SEC Benz with 113k miles, about 30k since valves...UNBELIEVABLE!! Cold start on 1st turn of starter EVERY time, not the 4-6 turns... After the results with oil treatment, did tranny, power steering and fuel ...

Pdidheon 1990 560 SEC Benz Monday, March 23, 2015
2004 Ford Ranger

When I first went to use this product, I was a bit skeptical, I had an issue with my truck starting. I had tried every chemical to run through the gas tank claiming to "fix" rough starts, all of them failing miserably. I ran the Cerma fuel treatment through and sure enough, next day, ...

CJ 2004 Ford Ranger, 4.0L, non-turbo, 4 spd automatic 4X4 Sunday, May 3, 2015
Pontiac Formula

I bought a bottle of Cerma on the recommendation of a friend at work. My 2001 Pontiac Formula had a lifter tick that I was hoping to get rid of. After putting in the Cermax and letting the engine run for 5 minutes, the tick was GONE! He later asked me if my car had more power, but ...

Richie 2001 Pontiac Formula Thursday, August 12, 2010
2004 silverado 5.3 v8

O ahhhhhhh mazing :) At first glance, i thought the price was a little crazy.but some in-the-know car guys that i know convinced me to give it a try, and i probably shouldn't have tried it on my only vehicle, but what the hell :D. my vehicle wasn't in bad shape (2004 silverado 5.3 ...

Stephen 2004 silverado 5.3 v8 Thursday, May 23, 2013

Just received the engine treatment and it works perfectly :)

My car has more torque, sounds great it's also smoother running.
My vtec kicks @ 6k and pulls through all gears perfectly. I need to replace my timing chain and I'm sorry I didn't change it before using the cerma.

So ...

James T. (UK) 2003 Type R Honda Civic EP3 with VTEC Engine and 114,500 miles Monday, March 10, 2014
2006 Chevy Equinox

Hello John,

My Cerma Story #1) Treated a Chevy a week ago. Someone very close to me, I cannot disclose who, got out of the car today and removed some items from the back seat, pressed the all door lock button on the passenger side and went into a client’s office for an hour.  ...

Ian Roe 2006 Chevy Equinox 6 cyl with 88,000 km Thursday, June 9, 2011
AUD$ 130.00
CERMA ENGINE TREATMENT FOR GASOLINE OR DIESEL...
  • Save 5%
AUD$ 375.00 AUD$ 357.50
CERMA ENGINE TREATMENT DIESEL TRUCKS / SEMIS /...
AUD$ 87.00
CERMA FOR AUTOMATIC TRANSMISSIONS Cerma...
AUD$ 90.00
CERMA MOTORCYCLE TREATMENT Cerma STM-3®...
AUD$ 71.50
Cerma Blue Ice works in all A/C and Regirgeration...