• Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More
2000 Acura TL

Dear John: I had an appointment with Acura concerning an alignment. My 2000 Acura TL has 302,000.00 miles. As you remember from our phone conversation an application of the engine treatment gave me a very noticeable increase in gas mileage. But, also, the engine performed smoothly ...

Gerald S. 2000 Acura TL Tuesday, May 26, 2015
1988 Dodge Box Van

I have used Cerma for about 4 months on different cars and one small truck.

Our 1991 Subaru was getting 19 to 20 miles per gallon when I treated the engine only and saw no increase in mileage but my wife complained about the increase in power because the car had a slow shift ...

Wayne Blakeley 1991 Subaru, 2002 Chrysler AWD Mini Van, 1988 Dodge Box Van Saturday, May 12, 2012

So...I just got the oil changed to Cerma 5W30 and could feel a huge difference just starting the car up. Engine vibration in the pedal has gone almost to zero and the acceleration feels smoother. The best way to describe how it feels is by watching the test video that john put up ...

CH3mist - Veloster Forum Member Hyundai Veloster Saturday, February 1, 2014

Update: 4/23/15: Rocket fuel. Just wanted to say that I have now treated all three of our autos with the Engine, trans, and power steering treatments and they are running like new, if not better than new. Keep up the good work. Now I'm going to get the air cond. treatments for ...

Brad T. Chevy Colorado Thursday, April 23, 2015
Bagger Motorcycle

December 2007 - I treated my 2002 Harley Davidson Custom Bagger motorcycle on the trip to Arkansas. The main thing that I noticed is the fuel mileage increase of at least 6 mpg. I was very happy as I was driving hard at speeds of at least 75-80 mph all day long on a 1700 mile round ...

Bob M. 2002 Harley Davidson Custom Bagger Motorcycle Tuesday, December 11, 2007
2004 Ford Ranger

When I first went to use this product, I was a bit skeptical, I had an issue with my truck starting. I had tried every chemical to run through the gas tank claiming to "fix" rough starts, all of them failing miserably. I ran the Cerma fuel treatment through and sure enough, next day, ...

CJ 2004 Ford Ranger, 4.0L, non-turbo, 4 spd automatic 4X4 Sunday, May 3, 2015
1990 Mitsubishi Montero

What the ......, this stuff actually works!
Here's the story...1990 Mitsubishi Montero that I bought new. First it was the unofficial Cheerleading Team vehicle for my daughter and now it is the unofficial Baseball Team vehicle for my son. Currently at 144,853 miles. I was turned ...

Chris C. 1990 Mitsubishi Montero Tuesday, April 7, 2015
Toro Push Mower

GREAT product I use CERMA in EVERYTHING from my TORO push mower to both my Chevrolet vehicles with GREATLY improved gas mileage & lawn mower that runs like a "swiss watch" As long as CERMA is around I will be a Loyal customer, Thanks!

Re-posted from General Testimonials Aug 22/2010 ...

Anonymous Toro Push Mower Sunday, August 22, 2010

Re-post from:http://www.velosterturbo.org/forum/veloster-maintenance/5282-cerma-treatments-oil-lubricants-good-order-222.html#post353642
02-23-2016, 10:09 AM

I will say I'm only 2 days into the treatment with 22k miles on the odo only 100 miles driven since treated and already ...

Sly4c Thursday, March 10, 2016

I've tried them all and Cerma is by far the best product on the market! Better fuel economy, my engine runs smother and quieter than when I had it rebuilt, you can feel the increased power through out the power curve and I fill up less than I deed prior to treating my engine and am ...

David T 2002 Lexus RX 300 Sunday, September 7, 2014
2006 Jeep Grand Cherokee

I tried Cerma in my truck first and after 1 1/2 months my gas mileage went up by 3 mpg . My 2006 Jeep Grand Cherokee 3.7 L went from 14 mpg to 17 mpg local and hyw from 22 mpg to 25 mpg. Then I put it in my lawn mower. Before it was smoking and after 3 times mowing the lawn it ...

Seth W. 2006 Jeep Grand Cherokee 3.7 L Tuesday, May 5, 2015
1987 Suzuki Samurai

I put Cerma Engine Treatment into our 1987 Suzuki Samurai. It completely smoothed out the idle, and improved our gas mileage by about 18% right away! Love this stuff! --Ethan M. via Facebook

Ethan M. via Facebook 1987 Suzuki Samurai Friday, June 10, 2016
Toyota RAV-4

Hi,
Well I have been using Cerma in my 2002 Toyota RAV-4 with 130,000kms.
And what a difference, my gas mileage has improved 15-20% avg, the engine has more power, and seems smoother. I am really surprised that such a little bottle of fluid actually made a big impact. I'm sold ...

Nick 2002 Toyota RAV-4 Tuesday, August 31, 2010
Jeep Wrangler

Cerma makes everything run smoother. I was skeptical of Cerma at first, but decided to try it. For example, my wife owns a 2000 Jeep Wrangler. When we first bought the Jeep we were averaging about 16 to 17 miles per gallon. I put Cerma in the engine, transmission, transfer case, ...

Rich Wilson 2000 Jeep Wrangler and 2005 Honda VTX Wednesday, August 18, 2010
Intake

So here we are at 50,000 miles. Picture here is the cleanest intake valves ever seen on a GDI motor, by two EQUUS techs with 35 years experience between them. CERMA works. Way beyond anything.... Those of you contemplating its use, what are you waiting for. The SS turbo is going ...

Peter K. (aka Gaijii) From Veloster Forum -- CERMA Treatments/Oil/Lubricants: For the good of the order Sunday, November 1, 2015
Subaru Legacy 1997 Wagon

I have purchased 2oz of CERMA engine treatment with STM-3 and got a free 2oz of Fuel Treatment. Thank you for the gift! Vehicle is: Subaru Legacy 1997 Wagon , VIN: xxxG5LJ4WG08xxx, European version, 2.0lt. Engine, AWD, NON Turbo. Mostly driven on LPG(85-90% of the time)!!!

I ...

Ivo K. Subaru Legacy 1997 Wagon Tuesday, September 1, 2015
Jeep Grand Cherokee

I purchased a 1996 Jeep Grand Cherokee with 196,000 miles on it. The transmission was beginning to act up after a couple of months driving the vehicle. What was happening was when the Jeep was shifting into over drive at 50 miles an hour it was not as smooth as it should be. After ...

Ron R Jeep Grand Cherokee Sunday, April 15, 2012
.357 Sig Semi

I used the Cerma foam treatment in the following handguns: .44 revolver, .357 revolver.40 semi, .357 sig semi and AR 15 .223 rifle so far. I am very pleased with the results of all barrels. Next shooting session only required the use of bore snakes to clean the small amount of debris. ...

Dale W. .44 revolver, .357 revolver.40 semi, .357 sig semi and AR 15 .223 rifle Wednesday, October 7, 2015
2002 Ford F-150

Products Used Cerma Engine Treatment, Cerma Motor Oil:
I purchased the Diesel Engine treatment after reading about it and its possible benefits. I am so happy I did. It literally did reduce vibration within seconds of pouring it in my engine. It also slightly reduced the normal ...

Vance W. 2002 Ford F-150 Thursday, August 27, 2015
2010 BMW 550i

Hi, After 2000 miles my 2010 BMW 550i it runs better, no engine noise and 2-3 more MPG. Thanks ! -- Stephen K.

Steven K. 2010 BMW 550i Tuesday, March 8, 2016

I put Cerma Trans in and have noticed the trans shifts better and the temp gauge is reading cooler.

– Drew (10/25/2012, 09:35 PM)

Drew Challenger RT Thursday, October 25, 2012
Honda Pilot 2004 3.5L

Several tens of thousands of miles ago, I found out about Cerma Engine Treatment -- yep, I was skeptical. But talking with these wonderful folks convinced me to try it. After adding to the oil, I noticed a problem of concern: at the stop light, my car was so quiet i couldn't hear ...

John T. Honda Pilot 2004 3.5L Tuesday, February 6, 2018
Motorcycle

I was your biggest skeptic. I bought the Cerma Engine Treatment because of how passionate you were about the product. It has been sitting on my toolbox for months. I put Ii t in the bike today and within an hour I noticed it working. Wish I hadn’t waited so long. What have you ...

Joe M. Joe M. Branford, CT Sunday, July 17, 2016
BMW 318i

Hi everyone!

This post is a "give back" I hope to help a few with this one, as so many helped me with replies on my first post. I learned much. At that time I was asking about re-powering or rebuilding the b43 Onan in my well maintained '83 BMW 318i. The reason was that it smoked ...

Mike Wentz '83 BMW 318i Friday, August 7, 2009

I recently SiC treated a 1100cc motor on a 1984 Honda v65 Sabre VF100S and began with these compression numbers:

Cylinder #1: 120/170 Cylinder #2 : 142/170 Cylinder #3 : 138/170 Cylinder #4 : 140/170

After treatment, compression improved significantly. My post-treatment ...

Robert Kientop 1984 Honda v65 Sabre VF100S Wednesday, October 14, 2015
Diesel Semi-Truck

Just a quick note to tell you what Cerma has done for my trucks.

We put Cerma in the whole system of one truck with 798,000 miles, (engine {470 Detroit}, transmission, and both rear axles). Within 50 miles 95% vibrations were gone, stack smoke was all but gone, and pulling first ...

Everett Schaffer Co Owner E & C Transport, Inc / Terminal 74 for Ace Transportation Houma, Louisiana Sunday, January 28, 2007

6/3/2015: John, I have been using the Cerma Evo grade oil in my 2012 Prius for over a year now an was thrilled to get 53-54 miles to the gallon. Recently, I just got lazy one day and took my Prius in to the Valvaline oil change and had them put in their top of the line fully synthetic ...

Steve A. (Cincinnati) 2012 Prius (58 MPG) Wednesday, June 3, 2015
AUD$ 130.00
CERMA ENGINE TREATMENT FOR GASOLINE OR DIESEL...
  • Save 5%
AUD$ 375.00 AUD$ 357.50
CERMA ENGINE TREATMENT DIESEL TRUCKS / SEMIS /...
AUD$ 87.00
CERMA FOR AUTOMATIC TRANSMISSIONS Cerma...
AUD$ 90.00
CERMA MOTORCYCLE TREATMENT Cerma STM-3®...
AUD$ 71.50
Cerma Blue Ice works in all A/C and Regirgeration...