• Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More

Update: 4/23/15: Rocket fuel. Just wanted to say that I have now treated all three of our autos with the Engine, trans, and power steering treatments and they are running like new, if not better than new. Keep up the good work. Now I'm going to get the air cond. treatments for ...

Brad T. Chevy Colorado Thursday, April 23, 2015
2002 Toyota Sienna Minivan

I used Cerma STM-3 Engine Treatment in my 2002 Toyota Sienna Minivan; Fuel mileage went up from 260 mile per tank to 355 miles extremely happy with gas saved. I also used Cerma in my 2000 Dodge Caravan SE; Fuel mileage went up from 245 miles per full tank to 350 miles now. Lastly, ...

OKTAY TUZER 2002 Toyota Sienna Minivan Wednesday, March 7, 2012
Dodge Ram 250

Dear Cerma, I started using your products in the summer of 2013. I travel all over the country in my 1991 Dodge D250 two wheel drive with a 5.9 L Cummins turbo diesel. I have a topper on it and drive between 57 and 60 mph when on the highway. I always fuel up the same way and ...

Tom C. Dodge Ram 250 Monday, October 26, 2015
1998 Dodge Diesel Pickup

I treated my 1998 Dodge Diesel Pickup with 6 oz Cerma Engine| Treatment and the engine smoothed up and has much more power. I am very satisfied with this. I also put 2 oz in the transmission. The transmission was shifting rough and had a slight leak. After adding the Cerma STM-3 ...

Charles Penner 1998 Dodge Diesel Pickup Wednesday, February 29, 2012
2008 Cadillac Escalade

Dear Cerma, I have attached a photo of the average MPG on the 2008 Cadillac Escalade which was treated at 183,743 Miles. At 183,901 miles, MPG average was 16.5. At 184,619 miles, MPG average was 17.0. At 184,938 miles, MPG average was 22.2. Quite a difference, impressive. The ...

Michael H. 2008 Cadillac Escalade Sunday, December 13, 2015
2015 Denali 2500

Amazing!! This stuff really works as described and then some. I used it three 2015 GMCs (Denali 1500, Denali 2500, and Yukon XL). Smoothed out the idles , don't even know they were running, More responsive, and most importantly no lifter noise when you start them up first thing ...

Amazon Customer 2015 Denali 2500 Wednesday, December 23, 2015
Honda 1300 Shadow

I am the guy who spoke with you at length and purchased some fuel treatment, oil additive and gun lube. I put the fuel and oil additives in immediately. I have also run 2 more tanks of fuel with treatment, reducing additive each time and the last tank had none applied. The bike is ...

Kurt P. Honda 1300 Shadow Friday, June 24, 2016
Veloster

I'm only 2 days into the treatment with 22k miles on the odo only 100 miles driven since treated and already noticing a big difference when driving it on the highway and even in the city. I must say I've been made a believer. The car feels more normal and definitely feels like it ...

Sly4c Veloster Turbo Tuesday, February 23, 2016
Ford F150

Best product yet. I am a contractor. I put a lot of miles on my trucks -- about 500,000 on one truck that I bought brand new 4 years ago. I put in Cerma after I saw a YouTube video and thought to give it a try. I was initially worried about the expense in buying the product, but ...

Colt J. Ford F150 Wednesday, January 29, 2014

Hi John. I decided to try Cerma and my first use was in my daughter's 2002 Mazda Tribute with about 100,000 kms on it. It was running a bit rough and mileage was low 20's per gallon. I treated it and then we went on a family trip, loaded with 4 adults and full of golf clubs and ...

Tom D. 2002 Mazda Tribute Tuesday, February 18, 2014
Nedal

Would recommend this to anybody who is looking to keep their engine long lasting no matter how many miles is on it. Already used on three of the four cars in our household and have noticed a smoother sound to the engine as well as increased gas mileage on each tank at least getting ...

Nedal Excellent Product Wednesday, March 6, 2013
2006 Mercedes E350 4Matic

6/5/15: I wanted to let you know my 1997 Toyota is running like a top since I started using your products. I am ready to change to Cerma Oil and am looking forward to ongoing improvement. The transmission shifts like a dream and the power steering no longer "groans" at low speeds. ...

Raul Y. 2006 Mercedes E350 4Matic Friday, June 5, 2015
1996 Toyota Camry

TRY THIS IN YOUR ENGINE.........I was amazed, within 15 mins how better my engine sounded and now my car rides as good as ever........Cerma is awesome. (Facebook Post 2)

Gave the Cerma Motor treatment a try and the oil, and I must say that my car has never run better. I went from ...

Eric Dobbie '96 Toyota Camry Tuesday, July 22, 2014
2004 silverado 5.3 v8

O ahhhhhhh mazing :) At first glance, i thought the price was a little crazy.but some in-the-know car guys that i know convinced me to give it a try, and i probably shouldn't have tried it on my only vehicle, but what the hell :D. my vehicle wasn't in bad shape (2004 silverado 5.3 ...

Stephen 2004 silverado 5.3 v8 Thursday, May 23, 2013
Mitsubishi Challenger

Hullo John,
I bought 1 bottle of Cerma STM-3 Engine Treatment and 1 bottle of Cerma STM-3 Automatic Transmission Treatment from you in May 2008. I treated my Mitsubishi Challenger(see attachment) 4x4 engine which is a 3Ltr V6 in the engine and the transmission. I followed your ...

J Wulf Mitsubishi Challenger Sunday, February 8, 2009
Pontiac Formula

I bought a bottle of Cerma on the recommendation of a friend at work. My 2001 Pontiac Formula had a lifter tick that I was hoping to get rid of. After putting in the Cermax and letting the engine run for 5 minutes, the tick was GONE! He later asked me if my car had more power, but ...

Richie 2001 Pontiac Formula Thursday, August 12, 2010

Just prior to winter in 2012, I used 1/3 an ounce of Cerma engine treatment in my 1999 Craftsman snow blower. In the past it was necessary to have the choke on and to let it run a bit before using, especially in really cold weather. Even at that, it sometimes took a couple attempts ...

Darrell Hails 1999 Craftsman 5 H.P., 22 inch Dual Stage Snow Blower, Model C950-52105-1 Thursday, October 31, 2013
Ford F350 7.3L IH Diesel

I added the Cerma to the engine (7.3L IH diesel) and power steering box but not yet to the rest of the drive train. When I first put my foot on the gas, my diesel ran like a gasoline engine smooth and fast. Had to slow down on purpose. Gave Cerma and you a plug on one of the shows ...

Dr. Wong Ford F350 7.3L IH Diesel Thursday, April 12, 2012
2006 Chevy Equinox

Hello John,

My Cerma Story #1) Treated a Chevy a week ago. Someone very close to me, I cannot disclose who, got out of the car today and removed some items from the back seat, pressed the all door lock button on the passenger side and went into a client’s office for an hour.  ...

Ian Roe 2006 Chevy Equinox 6 cyl with 88,000 km Thursday, June 9, 2011
Dipstick

Well its finally complete,.. my VT has been engine treated, 6000 mi. ran in, and turbo treated, 6500 miles ran in. 7500 mi. can around, the "carrier" Motul which had served me well ( I'm a fan Cbrmale), was scheduled to come out and be replaced BY !!! TADAA !! CERMA oil 5w40. As I ...

Peter K. (aka Gaijii) From Veloster Forum -- CERMA Treatments/Oil/Lubricants: For the good of the order Saturday, December 28, 2013
Toro Push Mower

GREAT product I use CERMA in EVERYTHING from my TORO push mower to both my Chevrolet vehicles with GREATLY improved gas mileage & lawn mower that runs like a "swiss watch" As long as CERMA is around I will be a Loyal customer, Thanks!

Re-posted from General Testimonials Aug 22/2010 ...

Anonymous Toro Push Mower Sunday, August 22, 2010
5.7l VZ Commdore

i bought a ls1 5.7l VZ Commodore Utility at auction driving home the check engine light was on ( engine code low oil pressure) and the oil light came on and the engine had a knocking / ticking sound in the motor yet oil level was normal i knew i was in for a big $ repair job on engine. ...

Robert K. 5.7l VZ Commodore Tuesday, September 22, 2015
2002 Mack Semi

I own a 2002 Mack semi. My truck started using 2 to 3 gallons of oil per week. I was told I needed to rebuild the motor, rings, sleeves, rod, and main bearings. The motor had an excessive amount of blow by. I added Cerma and followed the instructions carefully. Over the next three ...

deliveredtrucking@ 2002 Mack Semi Thursday, April 23, 2015

I put Cerma Trans in and have noticed the trans shifts better and the temp gauge is reading cooler.

– Drew (10/25/2012, 09:35 PM)

Drew Challenger RT Thursday, October 25, 2012
Yanmar Tractor

I was a skeptic, but when I added the Cerma Engine Oil Treatment to my Yanmar, the change was amazing! Within 20 minutes the engine smoothed out, became much quieter, and is clearly running much better. I can pull an extra 300-400 rpm – that means more horsepower out the shaft – without ...

Chuck W. Yanmar Tractor Thursday, September 3, 2015
Alliant Energy

We have used Cerma in a gear box which is 1 of 2 identical units. The one
we treated was initially running 60 decrees hotter than the other one. We want them to
run at no more than 180 degrees. The manufacturing company tried changing out the
gears and in essence did everything ...

Eric Krahenbuhl Alliant Energy, Emery Generating Station Monday, July 16, 2012
Acura RL Automatic Transmission

Fuel Treatment from April 14th, 2015: Great stuff. My gas mileage definitely goes up steadily, as per my digital gauge, when I use this stuff. I absolutely love this product. My engine runs very smooth with this product. Highly recommended. -- MichiganSooner via Amazon

Transmission ...

MichiganSooner Acura RL Automatic Transmission Monday, April 13, 2015
AUD$ 130.00
CERMA ENGINE TREATMENT FOR GASOLINE OR DIESEL...
  • Save 5%
AUD$ 375.00 AUD$ 357.50
CERMA ENGINE TREATMENT DIESEL TRUCKS / SEMIS /...
AUD$ 87.00
CERMA FOR AUTOMATIC TRANSMISSIONS Cerma...
AUD$ 90.00
CERMA MOTORCYCLE TREATMENT Cerma STM-3®...
AUD$ 71.50
Cerma Blue Ice works in all A/C and Regirgeration...