• Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More

Did a test session earlier, the initial run since adding the CERMAX 5W40 oil plus the manual transmission treatment.

First thing I noticed when shifting to second was how much easier the gear went in, I actually said "Wowwww" out loud.

Second thing is that the butt dyno felt ...

Veloster Forum Member Hyundai Veloster Thursday, February 6, 2014

I am writing you today to let you know how pleased I am with your product (Cerma). I have seen many products make many claims and usually there is a lot more fluff than there is results. I am the director of sales for a 500 Million dollar a year company in Minneapolis Minnesota, so ...

Jay Erickson - Prior Lake Minnesota 1995 Isuzu Rodeo with 130,000 miles Thursday, October 31, 2013
2008 Cadillac Escalade

Dear Cerma, I have attached a photo of the average MPG on the 2008 Cadillac Escalade which was treated at 183,743 Miles. At 183,901 miles, MPG average was 16.5. At 184,619 miles, MPG average was 17.0. At 184,938 miles, MPG average was 22.2. Quite a difference, impressive. The ...

Michael H. 2008 Cadillac Escalade Sunday, December 13, 2015
ar15

Cerma Gun Lube. I followed the instructions as directed. I shot a 30 round magazine as fast as I could pull the trigger out of my AR-15. After shooting the rounds I accidentally brushed the barrel of my gun with my forearm and instinctively pulled it away so not to get burned. ...

Dan P. Colt AR-15 Tuesday, May 5, 2015

I put Cerma Trans in and have noticed the trans shifts better and the temp gauge is reading cooler.

– Drew (10/25/2012, 09:35 PM)

Drew Challenger RT Thursday, October 25, 2012

I have gone through 1000 miles of engine treatment+Transmission fluid change followed by 4000 miles of Cerma oil ->Filter change -> then another 1000 miles. So I have posted on Veloster forum that I used to get 26.8 MPG at my best on 100% highway trips (cruising at 75~80mph). Here ...

Sungyoung Kim 1998 Ford Mustang V6 168,000 Miles Thursday, June 12, 2014

Update: 4/23/15: Rocket fuel. Just wanted to say that I have now treated all three of our autos with the Engine, trans, and power steering treatments and they are running like new, if not better than new. Keep up the good work. Now I'm going to get the air cond. treatments for ...

Brad T. Chevy Colorado Thursday, April 23, 2015

Wanted to update on the Lancer. We are 2k miles into the cerma max 5w40 oil and I pulled the dipstick... No joke it looks like I just did the oil change. I'll post up pics when I get a chance. As a reminder the Lancer has 111k so I expected to see some dark oil. But it was completely ...

Turbomatte Mitsubishi Lancer Thursday, June 12, 2014
Mercedes Benz '91 560 SEC

CERMA IS THE REAL DEAL!!

I heard about Cerma oil treatment from a friend who had amazing results with a sluggish high-mile Acura minivan. I treated my Mercedes Benz '91 560 SEC (113k miles) 4 weeks ago with Cerma engine, transmission, power steering and fuel treatment and can report ...

Patrick M. Mercedes Benz '91 560 SEC Monday, April 6, 2015
2015 Denali 2500

Amazing!! This stuff really works as described and then some. I used it three 2015 GMCs (Denali 1500, Denali 2500, and Yukon XL). Smoothed out the idles , don't even know they were running, More responsive, and most importantly no lifter noise when you start them up first thing ...

Amazon Customer 2015 Denali 2500 Wednesday, December 23, 2015
Dodge Ram 250

Dear Cerma, I started using your products in the summer of 2013. I travel all over the country in my 1991 Dodge D250 two wheel drive with a 5.9 L Cummins turbo diesel. I have a topper on it and drive between 57 and 60 mph when on the highway. I always fuel up the same way and ...

Tom C. Dodge Ram 250 Monday, October 26, 2015

Thanks a lot for explaining in detail how Cerma STM-3 works. I'm going to purchase & use one. My vehicle uses 5W-20 engine oil. Its engine has a Multi-Displacement System application which is viscosity sensitive according to the manufacturer. Best regards & have a great day. Posted: ...

John Flood Chevy Silverado 6.2 Liter Thursday, August 28, 2014
Motorcycle

I was your biggest skeptic. I bought the Cerma Engine Treatment because of how passionate you were about the product. It has been sitting on my toolbox for months. I put Ii t in the bike today and within an hour I noticed it working. Wish I hadn’t waited so long. What have you ...

Joe M. Joe M. Branford, CT Sunday, July 17, 2016
Mack 350

This stuff is crazy good although I need to replace injection pump on my Mack 350. This product made the truck run the best it has done for a year. Almost made me forget the pump. Suggestions for a new pump? -- Peter P. via Amazon (Verified Purchase)

Peter P. Mack 350 Sunday, July 24, 2016
Ford F350 7.3L IH Diesel

I added the Cerma to the engine (7.3L IH diesel) and power steering box but not yet to the rest of the drive train. When I first put my foot on the gas, my diesel ran like a gasoline engine smooth and fast. Had to slow down on purpose. Gave Cerma and you a plug on one of the shows ...

Dr. Wong Ford F350 7.3L IH Diesel Thursday, April 12, 2012

My name is ECS, i was introduced to your product by a friend. I spoke with John your technical analyst and asked him if this would be a good product for my car he said that indeed it would. I ordered one bottle of the Cerma Engine Treatment and used it in my car for approximately ...

Ernest Strong VW Tuesday, December 6, 2011
Subaru Legacy 1997 Wagon

I have purchased 2oz of CERMA engine treatment with STM-3 and got a free 2oz of Fuel Treatment. Thank you for the gift! Vehicle is: Subaru Legacy 1997 Wagon , VIN: xxxG5LJ4WG08xxx, European version, 2.0lt. Engine, AWD, NON Turbo. Mostly driven on LPG(85-90% of the time)!!!

I ...

Ivo K. Subaru Legacy 1997 Wagon Tuesday, September 1, 2015
BMW 318i

Hi everyone!

This post is a "give back" I hope to help a few with this one, as so many helped me with replies on my first post. I learned much. At that time I was asking about re-powering or rebuilding the b43 Onan in my well maintained '83 BMW 318i. The reason was that it smoked ...

Mike Wentz '83 BMW 318i Friday, August 7, 2009
1993 Mustang Motor in a 1993 Miata

My car has a 1993 mustang motor and 5 speed transmission in a 1993 miata. I put both the engine additive and the gas treatment in the car at nearly the same time. The car definitely runs more smoothly. Throttle response is much improved. Oil pressure is up 5 lbs. I am very pleased. ...

J. Dwight 1993 Mustang Motor in a in a 1993 Miata Saturday, October 5, 2013
2001 Toyota Avalon

I've read this thread for a while and decided to buy some AT treatment and 2 engine treatments yesterday. But not for my Veloster. I bought a beater truck (165K miles) for hunting and use around the house so I'm going to treat that with CERMA because why not. I'm also putting an engine ...

TheBlackBass 2001 Toyota Avalon Tuesday, February 23, 2016

So...I just got the oil changed to Cerma 5W30 and could feel a huge difference just starting the car up. Engine vibration in the pedal has gone almost to zero and the acceleration feels smoother. The best way to describe how it feels is by watching the test video that john put up ...

CH3mist - Veloster Forum Member Hyundai Veloster Saturday, February 1, 2014
2003 Ford F250

The best. Powered up my 12 year old truck -- it feels like new. I have a Ford F250, 2003 with 200,000.00 miles and in good shape, but after I used this product I felt the change -- more power, quieter, faster to respond. I feel like I have a new truck. I also did the transmission, ...

Giovanni 2003 Ford F250 Thursday, January 21, 2016
2011 Ford Fusion SE

8/27/14 - FYI! I had my car at the dealer this morning for a recall service appt. My 2011 Fusion with 81k miles on the 2.5L 4 cyl duratec engine was "quieter then a brand new engine in any car found on the lot..." according to the service technician who worked on the car.

8/14/14 ...

Douglas E. Immediate improvement! - 2011 Ford Fusion SE Sunday, October 11, 2015

Dear Great Cerma Product, I have just used the transmission and engine treatment. So Far So Good. I notice an improvement with the transmission, and the engine seems to be idling smother and faster. I expect to be most pleased with my investment on a 191K mile CHEVY Venture 3.4 van. ...

Robert F. Chevy 1998 Venture LS Monday, December 21, 2015
.357 Sig Semi

I used the Cerma foam treatment in the following handguns: .44 revolver, .357 revolver.40 semi, .357 sig semi and AR 15 .223 rifle so far. I am very pleased with the results of all barrels. Next shooting session only required the use of bore snakes to clean the small amount of debris. ...

Dale W. .44 revolver, .357 revolver.40 semi, .357 sig semi and AR 15 .223 rifle Wednesday, October 7, 2015

Hello,
Just want to let you know of the positive results I have had so far: 2300 miles since Cerma was added to crankcase; oil consumption has been cut in half, from 4 quarts per month down to 2 quarts per month; slight mileage increase, about 1 mile per gallon more. Compression ...

Scott A. 2002 Nissan Altima 2.5L Wednesday, June 11, 2014
2001 Peterbilt

Heard of this product from a friend put it in my dads 2001 Peterbilt Generator after about 2 min of running it quieted down and I couldn't even tell it was running.. Can't wait to put it in the engine and see what kind of fuel mileage he gets. Great product very satisfied. – John ...

John Leckington 2001 Peterbilt Generator Wednesday, March 7, 2012
AUD$ 130.00
CERMA ENGINE TREATMENT FOR GASOLINE OR DIESEL...
  • Save 5%
AUD$ 375.00 AUD$ 357.50
CERMA ENGINE TREATMENT DIESEL TRUCKS / SEMIS /...
AUD$ 87.00
CERMA FOR AUTOMATIC TRANSMISSIONS Cerma...
AUD$ 90.00
CERMA MOTORCYCLE TREATMENT Cerma STM-3®...
AUD$ 71.50
Cerma Blue Ice works in all A/C and Regirgeration...