• Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More
BMW 318i

Hi everyone!

This post is a "give back" I hope to help a few with this one, as so many helped me with replies on my first post. I learned much. At that time I was asking about re-powering or rebuilding the b43 Onan in my well maintained '83 BMW 318i. The reason was that it smoked ...

Mike Wentz '83 BMW 318i Friday, August 7, 2009
2004 silverado 5.3 v8

O ahhhhhhh mazing :) At first glance, i thought the price was a little crazy.but some in-the-know car guys that i know convinced me to give it a try, and i probably shouldn't have tried it on my only vehicle, but what the hell :D. my vehicle wasn't in bad shape (2004 silverado 5.3 ...

Stephen 2004 silverado 5.3 v8 Thursday, May 23, 2013
Myrtle Beach Metro Cab

Update: My 2004 TC now has 349,000 miles. At 288,000. It was using a qt of oil every 500 miles now it uses a qt at 4,000. This van has another 100,000 left easy! It runs great and is the best running cab in Myrtle Beach. Thank You Cerma!

Original: Just finished 4800 miles on ...

Wade W. Myrtle Beach Metro Cab Friday, March 25, 2016
1996 Toyota Camry

TRY THIS IN YOUR ENGINE.........I was amazed, within 15 mins how better my engine sounded and now my car rides as good as ever........Cerma is awesome. (Facebook Post 2)

Gave the Cerma Motor treatment a try and the oil, and I must say that my car has never run better. I went from ...

Eric Dobbie '96 Toyota Camry Tuesday, July 22, 2014
2004 Ford Ranger

When I first went to use this product, I was a bit skeptical, I had an issue with my truck starting. I had tried every chemical to run through the gas tank claiming to "fix" rough starts, all of them failing miserably. I ran the Cerma fuel treatment through and sure enough, next day, ...

CJ 2004 Ford Ranger, 4.0L, non-turbo, 4 spd automatic 4X4 Sunday, May 3, 2015

I've tried them all and Cerma is by far the best product on the market! Better fuel economy, my engine runs smother and quieter than when I had it rebuilt, you can feel the increased power through out the power curve and I fill up less than I deed prior to treating my engine and am ...

David T 2002 Lexus RX 300 Sunday, September 7, 2014
Mitsubishi Challenger

Hullo John,
I bought 1 bottle of Cerma STM-3 Engine Treatment and 1 bottle of Cerma STM-3 Automatic Transmission Treatment from you in May 2008. I treated my Mitsubishi Challenger(see attachment) 4x4 engine which is a 3Ltr V6 in the engine and the transmission. I followed your ...

J Wulf Mitsubishi Challenger Sunday, February 8, 2009

I put Cerma Trans in and have noticed the trans shifts better and the temp gauge is reading cooler.

– Drew (10/25/2012, 09:35 PM)

Drew Challenger RT Thursday, October 25, 2012
2008 Cadillac Escalade

Dear Cerma, I have attached a photo of the average MPG on the 2008 Cadillac Escalade which was treated at 183,743 Miles. At 183,901 miles, MPG average was 16.5. At 184,619 miles, MPG average was 17.0. At 184,938 miles, MPG average was 22.2. Quite a difference, impressive. The ...

Michael H. 2008 Cadillac Escalade Sunday, December 13, 2015
2006 Mercedes E350 4Matic

6/5/15: I wanted to let you know my 1997 Toyota is running like a top since I started using your products. I am ready to change to Cerma Oil and am looking forward to ongoing improvement. The transmission shifts like a dream and the power steering no longer "groans" at low speeds. ...

Raul Y. 2006 Mercedes E350 4Matic Friday, June 5, 2015
2015 Volvo Day Cab

I just wanted to tell you about my Volvo semi that I drive. It is a 2015 Volvo Day Cab with A/T. It now has 39,500 miles on it. I treated it at about 10K and fuel economy increased even though it was a new truck to about 4/10 mile per gallon. When the oil was changed by the company ...

Chad S. 2015 Volvo Day Cab with A/T Tuesday, September 29, 2015
Mack 350

This stuff is crazy good although I need to replace injection pump on my Mack 350. This product made the truck run the best it has done for a year. Almost made me forget the pump. Suggestions for a new pump? -- Peter P. via Amazon (Verified Purchase)

Peter P. Mack 350 Sunday, July 24, 2016
2007 Chevy Colorado

Reposted from http://www.amazon.com/Cerma-Gas-Ceramic-Engine-Treatment/dp/B00AZONLUC/ By Brad on February 25, 2015

This is the best stuff I've ever used. I did not buy from Amazon but bought the Engine Treatment direct from the manufacturer. Now that being said, this is the best ...

Brad 2007 Chevy Colorado Friday, May 15, 2015

Hi John. I decided to try Cerma and my first use was in my daughter's 2002 Mazda Tribute with about 100,000 kms on it. It was running a bit rough and mileage was low 20's per gallon. I treated it and then we went on a family trip, loaded with 4 adults and full of golf clubs and ...

Tom D. 2002 Mazda Tribute Tuesday, February 18, 2014
.357 Sig Semi

I used the Cerma foam treatment in the following handguns: .44 revolver, .357 revolver.40 semi, .357 sig semi and AR 15 .223 rifle so far. I am very pleased with the results of all barrels. Next shooting session only required the use of bore snakes to clean the small amount of debris. ...

Dale W. .44 revolver, .357 revolver.40 semi, .357 sig semi and AR 15 .223 rifle Wednesday, October 7, 2015

Wanted to update on the Lancer. We are 2k miles into the cerma max 5w40 oil and I pulled the dipstick... No joke it looks like I just did the oil change. I'll post up pics when I get a chance. As a reminder the Lancer has 111k so I expected to see some dark oil. But it was completely ...

Turbomatte Mitsubishi Lancer Thursday, June 12, 2014
1988 Dodge Box Van

I have used Cerma for about 4 months on different cars and one small truck.

Our 1991 Subaru was getting 19 to 20 miles per gallon when I treated the engine only and saw no increase in mileage but my wife complained about the increase in power because the car had a slow shift ...

Wayne Blakeley 1991 Subaru, 2002 Chrysler AWD Mini Van, 1988 Dodge Box Van Saturday, May 12, 2012
40 FT Meridian Yacht

The boat is going over 28 MPH. Granted clean bottom and props but I don’t believe it ever went over 26ish on this boat. It is a 40 FT Meridian Yacht weighing 17 tons. Top end speed was increased about 10% and that is before we start with the CERMAX Motor Oil.

Leigh Overland 40 FT Meridian Yacht Wednesday, June 4, 2014
2001 Peterbilt

Heard of this product from a friend put it in my dads 2001 Peterbilt Generator after about 2 min of running it quieted down and I couldn't even tell it was running.. Can't wait to put it in the engine and see what kind of fuel mileage he gets. Great product very satisfied. – John ...

John Leckington 2001 Peterbilt Generator Wednesday, March 7, 2012
Toro Push Mower

GREAT product I use CERMA in EVERYTHING from my TORO push mower to both my Chevrolet vehicles with GREATLY improved gas mileage & lawn mower that runs like a "swiss watch" As long as CERMA is around I will be a Loyal customer, Thanks!

Re-posted from General Testimonials Aug 22/2010 ...

Anonymous Toro Push Mower Sunday, August 22, 2010
Diesel Semi-Truck

Just a quick note to tell you what Cerma has done for my trucks.

We put Cerma in the whole system of one truck with 798,000 miles, (engine {470 Detroit}, transmission, and both rear axles). Within 50 miles 95% vibrations were gone, stack smoke was all but gone, and pulling first ...

Everett Schaffer Co Owner E & C Transport, Inc / Terminal 74 for Ace Transportation Houma, Louisiana Sunday, January 28, 2007
Fedex

FedEx driver reports truck running smoother with increased power, as prior the truck was having problems getting up to freeway speeds. Driver was very happy to have treated this truck with Cerma Engine Treatment, and is looking forward to changing out to Cerma Motor Oil so he can ...

Master Admin Fedex Ground Delivery Truck Monday, August 17, 2015
1998 Dodge Diesel Pickup

I treated my 1998 Dodge Diesel Pickup with 6 oz Cerma Engine| Treatment and the engine smoothed up and has much more power. I am very satisfied with this. I also put 2 oz in the transmission. The transmission was shifting rough and had a slight leak. After adding the Cerma STM-3 ...

Charles Penner 1998 Dodge Diesel Pickup Wednesday, February 29, 2012
Lexus IS

John,
I applied the product to my Lexus, and I could tell and real difference in power. If I can get my right foot to cooperate, I bet I’ll see fuel savings. I just wanted to let you know. REALLY COOL! --Dennis B
received via e-mail at cermaceo@gmail.com (Nov. 12 2010)

Dennis B 2007 Lexus IS 350 Friday, November 12, 2010

I am writing you today to let you know how pleased I am with your product (Cerma). I have seen many products make many claims and usually there is a lot more fluff than there is results. I am the director of sales for a 500 Million dollar a year company in Minneapolis Minnesota, so ...

Jay Erickson - Prior Lake Minnesota 1995 Isuzu Rodeo with 130,000 miles Thursday, October 31, 2013
Intake

So here we are at 50,000 miles. Picture here is the cleanest intake valves ever seen on a GDI motor, by two EQUUS techs with 35 years experience between them. CERMA works. Way beyond anything.... Those of you contemplating its use, what are you waiting for. The SS turbo is going ...

Peter K. (aka Gaijii) From Veloster Forum -- CERMA Treatments/Oil/Lubricants: For the good of the order Sunday, November 1, 2015

Dear Great Cerma Product, I have just used the transmission and engine treatment. So Far So Good. I notice an improvement with the transmission, and the engine seems to be idling smother and faster. I expect to be most pleased with my investment on a 191K mile CHEVY Venture 3.4 van. ...

Robert F. Chevy 1998 Venture LS Monday, December 21, 2015
AUD$ 130.00
CERMA ENGINE TREATMENT FOR GASOLINE OR DIESEL...
  • Save 5%
AUD$ 375.00 AUD$ 357.50
CERMA ENGINE TREATMENT DIESEL TRUCKS / SEMIS /...
AUD$ 87.00
CERMA FOR AUTOMATIC TRANSMISSIONS Cerma...
AUD$ 90.00
CERMA MOTORCYCLE TREATMENT Cerma STM-3®...
AUD$ 71.50
Cerma Blue Ice works in all A/C and Regirgeration...