• Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More

I have gone through 1000 miles of engine treatment+Transmission fluid change followed by 4000 miles of Cerma oil ->Filter change -> then another 1000 miles. So I have posted on Veloster forum that I used to get 26.8 MPG at my best on 100% highway trips (cruising at 75~80mph). Here ...

Sungyoung Kim 1998 Ford Mustang V6 168,000 Miles Thursday, June 12, 2014
1990 560 SEC Benz

I never bother writing reviews, however, this product is FANTASTIC!! 560 SEC Benz with 113k miles, about 30k since valves...UNBELIEVABLE!! Cold start on 1st turn of starter EVERY time, not the 4-6 turns... After the results with oil treatment, did tranny, power steering and fuel ...

Pdidheon 1990 560 SEC Benz Monday, March 23, 2015

I am writing you today to let you know how pleased I am with your product (Cerma). I have seen many products make many claims and usually there is a lot more fluff than there is results. I am the director of sales for a 500 Million dollar a year company in Minneapolis Minnesota, so ...

Jay Erickson - Prior Lake Minnesota 1995 Isuzu Rodeo with 130,000 miles Thursday, October 31, 2013
Bike

Thanks for the emails, i am getting better gas millage in my bike, was at 39 MPG. I am now getting 43 MPG after 300 miles of riding on Cerma! --Greg J. – Wolcott, CT

Greg J. Saturday, June 25, 2016

Just prior to winter in 2012, I used 1/3 an ounce of Cerma engine treatment in my 1999 Craftsman snow blower. In the past it was necessary to have the choke on and to let it run a bit before using, especially in really cold weather. Even at that, it sometimes took a couple attempts ...

Darrell Hails 1999 Craftsman 5 H.P., 22 inch Dual Stage Snow Blower, Model C950-52105-1 Thursday, October 31, 2013
1987 Suzuki Samurai

I put Cerma Engine Treatment into our 1987 Suzuki Samurai. It completely smoothed out the idle, and improved our gas mileage by about 18% right away! Love this stuff! --Ethan M. via Facebook

Ethan M. via Facebook 1987 Suzuki Samurai Friday, June 10, 2016
Ford F350 7.3L IH Diesel

I added the Cerma to the engine (7.3L IH diesel) and power steering box but not yet to the rest of the drive train. When I first put my foot on the gas, my diesel ran like a gasoline engine smooth and fast. Had to slow down on purpose. Gave Cerma and you a plug on one of the shows ...

Dr. Wong Ford F350 7.3L IH Diesel Thursday, April 12, 2012
2008 Cadillac Escalade

Dear Cerma, I have attached a photo of the average MPG on the 2008 Cadillac Escalade which was treated at 183,743 Miles. At 183,901 miles, MPG average was 16.5. At 184,619 miles, MPG average was 17.0. At 184,938 miles, MPG average was 22.2. Quite a difference, impressive. The ...

Michael H. 2008 Cadillac Escalade Sunday, December 13, 2015
2002 Mack Semi

I own a 2002 Mack semi. My truck started using 2 to 3 gallons of oil per week. I was told I needed to rebuild the motor, rings, sleeves, rod, and main bearings. The motor had an excessive amount of blow by. I added Cerma and followed the instructions carefully. Over the next three ...

deliveredtrucking@ 2002 Mack Semi Thursday, April 23, 2015

My name is ECS, i was introduced to your product by a friend. I spoke with John your technical analyst and asked him if this would be a good product for my car he said that indeed it would. I ordered one bottle of the Cerma Engine Treatment and used it in my car for approximately ...

Ernest Strong VW Tuesday, December 6, 2011
2004 Nissan Maxima

I put both transmission and engine treatment in our Maxima last night,drove about 35 miles. I noticed a smoother running engine right away. Drove another 50 miles today, gas mileage is up about 2 miles a gallon. Will switch to Cerma Oil in about 3k miles. -- Sherman J. Round Rock, ...

Sherman J. 2004 Nissan Maxima Monday, June 22, 2015
2001 Toyota Avalon

I've read this thread for a while and decided to buy some AT treatment and 2 engine treatments yesterday. But not for my Veloster. I bought a beater truck (165K miles) for hunting and use around the house so I'm going to treat that with CERMA because why not. I'm also putting an engine ...

TheBlackBass 2001 Toyota Avalon Tuesday, February 23, 2016

So...I just got the oil changed to Cerma 5W30 and could feel a huge difference just starting the car up. Engine vibration in the pedal has gone almost to zero and the acceleration feels smoother. The best way to describe how it feels is by watching the test video that john put up ...

CH3mist - Veloster Forum Member Hyundai Veloster Saturday, February 1, 2014

Update: 4/23/15: Rocket fuel. Just wanted to say that I have now treated all three of our autos with the Engine, trans, and power steering treatments and they are running like new, if not better than new. Keep up the good work. Now I'm going to get the air cond. treatments for ...

Brad T. Chevy Colorado Thursday, April 23, 2015
Mack 350

This stuff is crazy good although I need to replace injection pump on my Mack 350. This product made the truck run the best it has done for a year. Almost made me forget the pump. Suggestions for a new pump? -- Peter P. via Amazon (Verified Purchase)

Peter P. Mack 350 Sunday, July 24, 2016
16” AR-15

I must admit that I tend to view products with skepticism however the proof was in the data. I saw a legitimate 200 fps gain in a 16” AR-15 that would be the equivalent of having a 20” barrel, as well as a legitimate 150 fps boost in a 40 cal Sig P-229R. Now when cleaning time came ...

Corey Vento- Police training officer Norwalk CT Police Department Tuesday, May 7, 2013

I recently SiC treated a 1100cc motor on a 1984 Honda v65 Sabre VF100S and began with these compression numbers:

Cylinder #1: 120/170 Cylinder #2 : 142/170 Cylinder #3 : 138/170 Cylinder #4 : 140/170

After treatment, compression improved significantly. My post-treatment ...

Robert Kientop 1984 Honda v65 Sabre VF100S Wednesday, October 14, 2015

I have been using Mobil 1, Shell Helix, Castrol Edge, and now Cerma (Cerma is the best motor oil I have ever used) At first I thought it was my engines life was up, but when I tested Cerma my engine came back to life , on my second car the same thing happened. the piston rings were ...

Richard Mercedes SL500 12 Cylinder and Audi R8 8 Cylinder Tuesday, April 23, 2013
2004 silverado 5.3 v8

O ahhhhhhh mazing :) At first glance, i thought the price was a little crazy.but some in-the-know car guys that i know convinced me to give it a try, and i probably shouldn't have tried it on my only vehicle, but what the hell :D. my vehicle wasn't in bad shape (2004 silverado 5.3 ...

Stephen 2004 silverado 5.3 v8 Thursday, May 23, 2013
Veloster

I'm only 2 days into the treatment with 22k miles on the odo only 100 miles driven since treated and already noticing a big difference when driving it on the highway and even in the city. I must say I've been made a believer. The car feels more normal and definitely feels like it ...

Sly4c Veloster Turbo Tuesday, February 23, 2016
Freightliner 12.7 Series 60 Detroit

Thank you Cerma! The day I put Cerma in my engine it smoothed out my choppy idle at 800rpm. And even today it is still getting 5.5mpg to 6.0 mpg driving to the Northwest and back to the Midwest a majority of the time. I added Cerma in at 825,000 miles, now truck has 1,016,000 miles. ...

Vincent J. Freightliner 12.7 Series 60 Detroit Monday, October 19, 2015
Toro Push Mower

GREAT product I use CERMA in EVERYTHING from my TORO push mower to both my Chevrolet vehicles with GREATLY improved gas mileage & lawn mower that runs like a "swiss watch" As long as CERMA is around I will be a Loyal customer, Thanks!

Re-posted from General Testimonials Aug 22/2010 ...

Anonymous Toro Push Mower Sunday, August 22, 2010
Diesel Semi-Truck

Just a quick note to tell you what Cerma has done for my trucks.

We put Cerma in the whole system of one truck with 798,000 miles, (engine {470 Detroit}, transmission, and both rear axles). Within 50 miles 95% vibrations were gone, stack smoke was all but gone, and pulling first ...

Everett Schaffer Co Owner E & C Transport, Inc / Terminal 74 for Ace Transportation Houma, Louisiana Sunday, January 28, 2007
Nedal

Would recommend this to anybody who is looking to keep their engine long lasting no matter how many miles is on it. Already used on three of the four cars in our household and have noticed a smoother sound to the engine as well as increased gas mileage on each tank at least getting ...

Nedal Excellent Product Wednesday, March 6, 2013
Ford F-150

The amazing Cerma technology! The reason I say amazing is because I worked at Douglas Aircraft in the engineering changes on the DC-9 program way back in the early 1960’s and we had a Cerma type product that did two things, stopped friction and heat, the difference was that technology ...

Capt. Gary Pylant Ford F-150 Thursday, September 3, 2015

Hello,
Just want to let you know of the positive results I have had so far: 2300 miles since Cerma was added to crankcase; oil consumption has been cut in half, from 4 quarts per month down to 2 quarts per month; slight mileage increase, about 1 mile per gallon more. Compression ...

Scott A. 2002 Nissan Altima 2.5L Wednesday, June 11, 2014
2008 Ford Transit Diesel 2.4Ltr Turbo Van with 155,000km

Update from NZ on Cerma: Hello, December last year I purchased several products from you. I changed my oil ran the vehicle for a while the added Cerma. I make a regular trip up a rather steep and long hill, a 3km climb. When I purchased the diesel van it would pull up this hill ...

Glen M. 2008 Ford Transit Diesel 2.4Ltr Turbo Van with 155,000km Saturday, March 21, 2015
AUD$ 130.00
CERMA ENGINE TREATMENT FOR GASOLINE OR DIESEL...
  • Save 5%
AUD$ 375.00 AUD$ 357.50
CERMA ENGINE TREATMENT DIESEL TRUCKS / SEMIS /...
AUD$ 87.00
CERMA FOR AUTOMATIC TRANSMISSIONS Cerma...
AUD$ 90.00
CERMA MOTORCYCLE TREATMENT Cerma STM-3®...
AUD$ 71.50
Cerma Blue Ice works in all A/C and Regirgeration...