• Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More
2004 Nissan Maxima

I put both transmission and engine treatment in our Maxima last night,drove about 35 miles. I noticed a smoother running engine right away. Drove another 50 miles today, gas mileage is up about 2 miles a gallon. Will switch to Cerma Oil in about 3k miles. -- Sherman J. Round Rock, ...

Sherman J. 2004 Nissan Maxima Monday, June 22, 2015
Series 60 Detroit

I own a trucking company and have been amazed at the results of the Cerma Engine Treatment and Cerma Motor Oils. I purchased Cerma because my older Series 60 Detroit was smoking badly, particularly when off the throttle. Even though overhauled only about a year and a half ago, the ...

Tom Hoover Series 60 Detroit Sunday, April 15, 2012
Yanmar Tractor

I was a skeptic, but when I added the Cerma Engine Oil Treatment to my Yanmar, the change was amazing! Within 20 minutes the engine smoothed out, became much quieter, and is clearly running much better. I can pull an extra 300-400 rpm – that means more horsepower out the shaft – without ...

Chuck W. Yanmar Tractor Thursday, September 3, 2015
2004 Ford F350 6.0

Works. 'Lil spendy but damn worked. Bought In april 2014 used in my '04 6.0 F350 4x4 an put some in my dad's dodge '05 3500 5.9 he even commented + on this, wish could afford more often tried others this works the best for me an my 6.0. Great product the Diesel fuel treatment better ...

D. Watson 2004 Ford F350 6.0 Tuesday, March 8, 2016

I just want to state that other than an amazing product, this company has amazing customer service. The day after ordering my engine treatment I received a call to inform me that I did not need a full 2oz, and then they asked to change my order to a 1oz and refund a portion of my ...

Tyler Conklin 2016 Hyundai Veloster Turbo Friday, September 16, 2016
2014 Jeep Grand Cherokee

Cerma Engine Treatment. My wife bought a brand new 2014 Jeep Grand Cherokee last September. She had approximately 15,000 miles on the engine when I added the Cerma Engine Treatment. After the suggested 3,000 miles I changed the oil and used CERMAX 5-20W oil. She drove an additional ...

Dan P. 2014 Jeep Grand Cherokee Tuesday, May 5, 2015
2001 Toyota Avalon

I've read this thread for a while and decided to buy some AT treatment and 2 engine treatments yesterday. But not for my Veloster. I bought a beater truck (165K miles) for hunting and use around the house so I'm going to treat that with CERMA because why not. I'm also putting an engine ...

TheBlackBass 2001 Toyota Avalon Tuesday, February 23, 2016
1987 Suzuki Samurai

I put Cerma Engine Treatment into our 1987 Suzuki Samurai. It completely smoothed out the idle, and improved our gas mileage by about 18% right away! Love this stuff! --Ethan M. via Facebook

Ethan M. via Facebook 1987 Suzuki Samurai Friday, June 10, 2016
Motorcycle

I was your biggest skeptic. I bought the Cerma Engine Treatment because of how passionate you were about the product. It has been sitting on my toolbox for months. I put Ii t in the bike today and within an hour I noticed it working. Wish I hadn’t waited so long. What have you ...

Joe M. Joe M. Branford, CT Sunday, July 17, 2016
2015 Subaru Outback

Unbelievable MPG increase!! My new 2015 subaru outback 3000 miles had 27.4 miles per gallon. I added this to the oil chamber under the hood, reved the engine up to 4000 rpm's for a few minutes, then drove it hard for 30 minutes on streets and freeway mostly. It's been 8 months and ...

Jennifer V. 2015 Subaru Outback Saturday, May 28, 2016
2002 Ford F-150

Products Used Cerma Engine Treatment, Cerma Motor Oil:
I purchased the Diesel Engine treatment after reading about it and its possible benefits. I am so happy I did. It literally did reduce vibration within seconds of pouring it in my engine. It also slightly reduced the normal ...

Vance W. 2002 Ford F-150 Thursday, August 27, 2015
1987 BMW M6

Hi John, I want you to know that the Cerma Transmission Treatment fixed my 25 year old BMW M6 manual tranny, which did not want to go into first gear much before. This appears to be a known issue with those Getrag gearboxes. The Cerma STM-3 Engine Treatment made this same vehicle ...

Glenn 1987 BMW M6 and 1989 Chrysler Dynasty Wednesday, February 29, 2012
Nedal

Would recommend this to anybody who is looking to keep their engine long lasting no matter how many miles is on it. Already used on three of the four cars in our household and have noticed a smoother sound to the engine as well as increased gas mileage on each tank at least getting ...

Nedal Excellent Product Wednesday, March 6, 2013
Subaru Legacy 1997 Wagon

I have purchased 2oz of CERMA engine treatment with STM-3 and got a free 2oz of Fuel Treatment. Thank you for the gift! Vehicle is: Subaru Legacy 1997 Wagon , VIN: xxxG5LJ4WG08xxx, European version, 2.0lt. Engine, AWD, NON Turbo. Mostly driven on LPG(85-90% of the time)!!!

I ...

Ivo K. Subaru Legacy 1997 Wagon Tuesday, September 1, 2015
Chevy Tahoe

I came across the Cerma product when we were looking for metal protection from our hydrogen units in gas burning engines. I first tried the Cerma in my 97' Chevy Tahoe, which had over 185,000 miles prior to using it. After about 10-15 minutes on the freeway I noticed the temperature ...

Jeff-Louis 97' Chevy Tahoe wtih over over 185,000 miles Tuesday, August 10, 2010

I put Cerma Trans in and have noticed the trans shifts better and the temp gauge is reading cooler.

– Drew (10/25/2012, 09:35 PM)

Drew Challenger RT Thursday, October 25, 2012
2015 Denali 2500

Amazing!! This stuff really works as described and then some. I used it three 2015 GMCs (Denali 1500, Denali 2500, and Yukon XL). Smoothed out the idles , don't even know they were running, More responsive, and most importantly no lifter noise when you start them up first thing ...

Amazon Customer 2015 Denali 2500 Wednesday, December 23, 2015

Re-post from:http://www.velosterturbo.org/forum/veloster-maintenance/5282-cerma-treatments-oil-lubricants-good-order-222.html#post353642
02-23-2016, 10:09 AM

I will say I'm only 2 days into the treatment with 22k miles on the odo only 100 miles driven since treated and already ...

Sly4c Thursday, March 10, 2016

I have gone through 1000 miles of engine treatment+Transmission fluid change followed by 4000 miles of Cerma oil ->Filter change -> then another 1000 miles. So I have posted on Veloster forum that I used to get 26.8 MPG at my best on 100% highway trips (cruising at 75~80mph). Here ...

Sungyoung Kim 1998 Ford Mustang V6 168,000 Miles Thursday, June 12, 2014
Kia Optima

Good afternoon,
I wanted to report your product results for my 2009 Kia Optima with 35k miles. I added a bottle to the automatic transmission and have experienced a much smoother shifting pattern. Otherwise not much to report.

I added one bottle to the engine oil and have noticed ...

Kevin Udell 2009 Kia Optima with 35k miles Thursday, August 5, 2010

In my application, 1991 BMW 750i 5.0L 12 cylinder, I was mainly trying to correct annoying hydraulic lifter noise without having to replace any lifters. The Cerma product worked almost immediately to quiet all noisy lifters and they have remained quiet for the last 30K miles on an ...

Mark C. McCafferty, P.E. 1991 BMW 750i 5.0L 12 cylinder Tuesday, February 18, 2014
Carbide Chain Saw

I think we performed a pretty significant experiment with your product today. My training officer did not return to the office but I will get more information tomorrow. We took 2 identical roof cutting carbide chain saws and had the same operator on the same roof make cuts one after ...

Chief Doug Carbide Chain Saws Wednesday, April 1, 2015

Update: 4/23/15: Rocket fuel. Just wanted to say that I have now treated all three of our autos with the Engine, trans, and power steering treatments and they are running like new, if not better than new. Keep up the good work. Now I'm going to get the air cond. treatments for ...

Brad T. Chevy Colorado Thursday, April 23, 2015
Jeep Wrangler

Cerma makes everything run smoother. I was skeptical of Cerma at first, but decided to try it. For example, my wife owns a 2000 Jeep Wrangler. When we first bought the Jeep we were averaging about 16 to 17 miles per gallon. I put Cerma in the engine, transmission, transfer case, ...

Rich Wilson 2000 Jeep Wrangler and 2005 Honda VTX Wednesday, August 18, 2010
Ford F350 7.3L IH Diesel

I added the Cerma to the engine (7.3L IH diesel) and power steering box but not yet to the rest of the drive train. When I first put my foot on the gas, my diesel ran like a gasoline engine smooth and fast. Had to slow down on purpose. Gave Cerma and you a plug on one of the shows ...

Dr. Wong Ford F350 7.3L IH Diesel Thursday, April 12, 2012
2004 Ford Edge

Hello Jim,

I would like to thank you for introducing me to Cerma and to such a quality product.

I am a certified Automotive Service Excellence Master Technician with 53 years of experience. I am always interested in the latest technology for automobiles and machinery. After ...

Robert Wilder 2004 Ford Edge Tuesday, June 5, 2012

Before using Cerma, this car, a work car with 160K miles, would jerk every time it changed gears when you drive and the water temperature would be pointed a little over half way up the temperature gauge. I was a little skeptical before but kept reading the testimonials and watching ...

Tuan H. 2002 Honda Accord EX V6 Tuesday, July 19, 2016
AUD$ 130.00
CERMA ENGINE TREATMENT FOR GASOLINE OR DIESEL...
  • Save 5%
AUD$ 375.00 AUD$ 357.50
CERMA ENGINE TREATMENT DIESEL TRUCKS / SEMIS /...
AUD$ 87.00
CERMA FOR AUTOMATIC TRANSMISSIONS Cerma...
AUD$ 90.00
CERMA MOTORCYCLE TREATMENT Cerma STM-3®...
AUD$ 71.50
Cerma Blue Ice works in all A/C and Regirgeration...