• Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More
2010 BMW 550i

Hi, After 2000 miles my 2010 BMW 550i it runs better, no engine noise and 2-3 more MPG. Thanks ! -- Stephen K.

Steven K. 2010 BMW 550i Tuesday, March 8, 2016
Honda 1300 Shadow

I am the guy who spoke with you at length and purchased some fuel treatment, oil additive and gun lube. I put the fuel and oil additives in immediately. I have also run 2 more tanks of fuel with treatment, reducing additive each time and the last tank had none applied. The bike is Read more

Kurt P. Honda 1300 Shadow Friday, June 24, 2016
Mercedes Benz '91 560 SEC

CERMA IS THE REAL DEAL!!

I heard about Cerma oil treatment from a friend who had amazing results with a sluggish high-mile Acura minivan. I treated my Mercedes Benz '91 560 SEC (113k miles) 4 weeks ago with Cerma engine, transmission, power steering and fuel treatment and can report Read more

Patrick M. Mercedes Benz '91 560 SEC Monday, April 6, 2015

Did a test session earlier, the initial run since adding the CERMAX 5W40 oil plus the manual transmission treatment.

First thing I noticed when shifting to second was how much easier the gear went in, I actually said "Wowwww" out loud.

Second thing is that the butt dyno felt Read more

Veloster Forum Member Hyundai Veloster Thursday, February 6, 2014
2007 Chevy Colorado

Reposted from http://www.amazon.com/Cerma-Gas-Ceramic-Engine-Treatment/dp/B00AZONLUC/ By Brad on February 25, 2015

This is the best stuff I've ever used. I did not buy from Amazon but bought the Engine Treatment direct from the manufacturer. Now that being said, this is the best Read more

Brad 2007 Chevy Colorado Friday, May 15, 2015
Myrtle Beach Metro Cab

Update: My 2004 TC now has 349,000 miles. At 288,000. It was using a qt of oil every 500 miles now it uses a qt at 4,000. This van has another 100,000 left easy! It runs great and is the best running cab in Myrtle Beach. Thank You Cerma!

Original: Just finished 4800 miles on Read more

Wade W. Myrtle Beach Metro Cab Friday, March 25, 2016

Just prior to winter in 2012, I used 1/3 an ounce of Cerma engine treatment in my 1999 Craftsman snow blower. In the past it was necessary to have the choke on and to let it run a bit before using, especially in really cold weather. Even at that, it sometimes took a couple attempts Read more

Darrell Hails 1999 Craftsman 5 H.P., 22 inch Dual Stage Snow Blower, Model C950-52105-1 Thursday, October 31, 2013
Ken's Automotive Services

Cerma lubrication is an advanced metal treatment that works great to reduce heat and friction in engines , drive trains and A/C compressors. The engines, drive trains, A/C compressors we have installed it in run much quieter, smoother and cooler! We would highly recommend it to anyone Read more

Ken Faurot Owner: Ken's Automotive Services Wednesday, March 7, 2012
Intake

So here we are at 50,000 miles. Picture here is the cleanest intake valves ever seen on a GDI motor, by two EQUUS techs with 35 years experience between them. CERMA works. Way beyond anything.... Those of you contemplating its use, what are you waiting for. The SS turbo is going Read more

Peter K. (aka Gaijii) From Veloster Forum -- CERMA Treatments/Oil/Lubricants: For the good of the order Sunday, November 1, 2015
2003 Honda Odyssey

Doing its magic with my '03 odyssey ! I really did not want to have the AC overhauled very pricey money I don't have so why not try this and see what happens well its only been two days and all ready there's a improvement. -- Tomster via Amazon

Tomster 2003 Honda Odyssey Wednesday, October 29, 2014
5.7l VZ Commdore

i bought a ls1 5.7l VZ Commodore Utility at auction driving home the check engine light was on ( engine code low oil pressure) and the oil light came on and the engine had a knocking / ticking sound in the motor yet oil level was normal i knew i was in for a big $ repair job on engine. Read more

Robert K. 5.7l VZ Commodore Tuesday, September 22, 2015
Motorcycle

I was your biggest skeptic. I bought the Cerma Engine Treatment because of how passionate you were about the product. It has been sitting on my toolbox for months. I put Ii t in the bike today and within an hour I noticed it working. Wish I hadn’t waited so long. What have you Read more

Joe M. Joe M. Branford, CT Sunday, July 17, 2016
Fedex

FedEx driver reports truck running smoother with increased power, as prior the truck was having problems getting up to freeway speeds. Driver was very happy to have treated this truck with Cerma Engine Treatment, and is looking forward to changing out to Cerma Motor Oil so he can Read more

Master Admin Fedex Ground Delivery Truck Monday, August 17, 2015

Just received the engine treatment and it works perfectly :)

My car has more torque, sounds great it's also smoother running.
My vtec kicks @ 6k and pulls through all gears perfectly. I need to replace my timing chain and I'm sorry I didn't change it before using the cerma.

So Read more

James T. (UK) 2003 Type R Honda Civic EP3 with VTEC Engine and 114,500 miles Monday, March 10, 2014

I have gone through 1000 miles of engine treatment+Transmission fluid change followed by 4000 miles of Cerma oil ->Filter change -> then another 1000 miles. So I have posted on Veloster forum that I used to get 26.8 MPG at my best on 100% highway trips (cruising at 75~80mph). Here Read more

Sungyoung Kim 1998 Ford Mustang V6 168,000 Miles Thursday, June 12, 2014

Dear Great Cerma Product, I have just used the transmission and engine treatment. So Far So Good. I notice an improvement with the transmission, and the engine seems to be idling smother and faster. I expect to be most pleased with my investment on a 191K mile CHEVY Venture 3.4 van. Read more

Robert F. Chevy 1998 Venture LS Monday, December 21, 2015
2000 Acura TL

Dear John: I had an appointment with Acura concerning an alignment. My 2000 Acura TL has 302,000.00 miles. As you remember from our phone conversation an application of the engine treatment gave me a very noticeable increase in gas mileage. But, also, the engine performed smoothly Read more

Gerald S. 2000 Acura TL Tuesday, May 26, 2015

I've already used Cerma STM-3 Engine Treatment on 1 vehicle and plan to use this shipment to do a second. Great product, great support. I love this product, and keep buying it when I discover a friend or acquaintance who needs it too. Thanks! – Stephen Wild Post 2 (04/13/2012, Read more

Stephen Wild Jeep Grand Cherokee Friday, April 13, 2012
Chevy Camarom RS

I put it in the engine oil and transmission. Transmission stopped slipping on very first drive home from work. I could not believe it!

Anonymous 1991 Chevy Camarom RS with 213,000 miles on it Saturday, July 31, 2010
Toyota RAV-4

Hi,
Well I have been using Cerma in my 2002 Toyota RAV-4 with 130,000kms.
And what a difference, my gas mileage has improved 15-20% avg, the engine has more power, and seems smoother. I am really surprised that such a little bottle of fluid actually made a big impact. I'm sold Read more

Nick 2002 Toyota RAV-4 Tuesday, August 31, 2010
Ford F-150

The amazing Cerma technology! The reason I say amazing is because I worked at Douglas Aircraft in the engineering changes on the DC-9 program way back in the early 1960’s and we had a Cerma type product that did two things, stopped friction and heat, the difference was that technology Read more

Capt. Gary Pylant Ford F-150 Thursday, September 3, 2015
2004 Ford Edge

Hello Jim,

I would like to thank you for introducing me to Cerma and to such a quality product.

I am a certified Automotive Service Excellence Master Technician with 53 years of experience. I am always interested in the latest technology for automobiles and machinery. After Read more

Robert Wilder 2004 Ford Edge Tuesday, June 5, 2012
2011 Ford Fusion SE

8/27/14 - FYI! I had my car at the dealer this morning for a recall service appt. My 2011 Fusion with 81k miles on the 2.5L 4 cyl duratec engine was "quieter then a brand new engine in any car found on the lot..." according to the service technician who worked on the car.

8/14/14 Read more

Douglas E. Immediate improvement! - 2011 Ford Fusion SE Sunday, October 11, 2015

I put Cerma Trans in and have noticed the trans shifts better and the temp gauge is reading cooler.

– Drew (10/25/2012, 09:35 PM)

Drew Challenger RT Thursday, October 25, 2012
2004 silverado 5.3 v8

O ahhhhhhh mazing :) At first glance, i thought the price was a little crazy.but some in-the-know car guys that i know convinced me to give it a try, and i probably shouldn't have tried it on my only vehicle, but what the hell :D. my vehicle wasn't in bad shape (2004 silverado 5.3 Read more

Stephen 2004 silverado 5.3 v8 Thursday, May 23, 2013

I've tried them all and Cerma is by far the best product on the market! Better fuel economy, my engine runs smother and quieter than when I had it rebuilt, you can feel the increased power through out the power curve and I fill up less than I deed prior to treating my engine and am Read more

David T 2002 Lexus RX 300 Sunday, September 7, 2014
2014 Jeep Grand Cherokee

Cerma Engine Treatment. My wife bought a brand new 2014 Jeep Grand Cherokee last September. She had approximately 15,000 miles on the engine when I added the Cerma Engine Treatment. After the suggested 3,000 miles I changed the oil and used CERMAX 5-20W oil. She drove an additional Read more

Dan P. 2014 Jeep Grand Cherokee Tuesday, May 5, 2015
AUD$ 130.00
CERMA ENGINE TREATMENT FOR GASOLINE OR DIESEL...
  • Save 5%
AUD$ 375.00 AUD$ 357.50
CERMA ENGINE TREATMENT DIESEL TRUCKS / SEMIS /...
AUD$ 87.00
CERMA FOR AUTOMATIC TRANSMISSIONS Cerma...
AUD$ 90.00
CERMA MOTORCYCLE TREATMENT Cerma STM-3®...
AUD$ 71.50
Cerma Blue Ice works in all A/C and Regirgeration...