• Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More
Pontiac Formula

I bought a bottle of Cerma on the recommendation of a friend at work. My 2001 Pontiac Formula had a lifter tick that I was hoping to get rid of. After putting in the Cermax and letting the engine run for 5 minutes, the tick was GONE! He later asked me if my car had more power, but ...

Richie 2001 Pontiac Formula Thursday, August 12, 2010

Hi John. I decided to try Cerma and my first use was in my daughter's 2002 Mazda Tribute with about 100,000 kms on it. It was running a bit rough and mileage was low 20's per gallon. I treated it and then we went on a family trip, loaded with 4 adults and full of golf clubs and ...

Tom D. 2002 Mazda Tribute Tuesday, February 18, 2014
2006 Chevy Equinox

Hello John,

My Cerma Story #1) Treated a Chevy a week ago. Someone very close to me, I cannot disclose who, got out of the car today and removed some items from the back seat, pressed the all door lock button on the passenger side and went into a client’s office for an hour.  ...

Ian Roe 2006 Chevy Equinox 6 cyl with 88,000 km Thursday, June 9, 2011

Just prior to winter in 2012, I used 1/3 an ounce of Cerma engine treatment in my 1999 Craftsman snow blower. In the past it was necessary to have the choke on and to let it run a bit before using, especially in really cold weather. Even at that, it sometimes took a couple attempts ...

Darrell Hails 1999 Craftsman 5 H.P., 22 inch Dual Stage Snow Blower, Model C950-52105-1 Thursday, October 31, 2013
Subaru Imprezza

I am amazed at this product. I put Cerma STM-3 in my 2009 subaru imprezza and went from 33 mpg hwy. to 38 hwy! the engine seems to be so smooth you can't tell it is running! So then I put it in my 04 dodge hemi sport truck and went from 15.5 to 19.5 mpg hwy! unbelievable!! this stuff ...

Brent Richards 2009 Subaru Imprezza and 04 Dodge Hemi Sport Truck Tuesday, September 11, 2012
2006 Jeep Grand Cherokee

I tried Cerma in my truck first and after 1 1/2 months my gas mileage went up by 3 mpg . My 2006 Jeep Grand Cherokee 3.7 L went from 14 mpg to 17 mpg local and hyw from 22 mpg to 25 mpg. Then I put it in my lawn mower. Before it was smoking and after 3 times mowing the lawn it ...

Seth W. 2006 Jeep Grand Cherokee 3.7 L Tuesday, May 5, 2015
2004 Nissan Maxima

I put both transmission and engine treatment in our Maxima last night,drove about 35 miles. I noticed a smoother running engine right away. Drove another 50 miles today, gas mileage is up about 2 miles a gallon. Will switch to Cerma Oil in about 3k miles. -- Sherman J. Round Rock, ...

Sherman J. 2004 Nissan Maxima Monday, June 22, 2015

I've tried them all and Cerma is by far the best product on the market! Better fuel economy, my engine runs smother and quieter than when I had it rebuilt, you can feel the increased power through out the power curve and I fill up less than I deed prior to treating my engine and am ...

David T 2002 Lexus RX 300 Sunday, September 7, 2014

I have gone through 1000 miles of engine treatment+Transmission fluid change followed by 4000 miles of Cerma oil ->Filter change -> then another 1000 miles. So I have posted on Veloster forum that I used to get 26.8 MPG at my best on 100% highway trips (cruising at 75~80mph). Here ...

Sungyoung Kim 1998 Ford Mustang V6 168,000 Miles Thursday, June 12, 2014

I put Cerma Trans in and have noticed the trans shifts better and the temp gauge is reading cooler.

– Drew (10/25/2012, 09:35 PM)

Drew Challenger RT Thursday, October 25, 2012
Lexus IS

John,
I applied the product to my Lexus, and I could tell and real difference in power. If I can get my right foot to cooperate, I bet I’ll see fuel savings. I just wanted to let you know. REALLY COOL! --Dennis B
received via e-mail at cermaceo@gmail.com (Nov. 12 2010)

Dennis B 2007 Lexus IS 350 Friday, November 12, 2010

Before using Cerma, this car, a work car with 160K miles, would jerk every time it changed gears when you drive and the water temperature would be pointed a little over half way up the temperature gauge. I was a little skeptical before but kept reading the testimonials and watching ...

Tuan H. 2002 Honda Accord EX V6 Tuesday, July 19, 2016
2010 BMW 550i

Hi, After 2000 miles my 2010 BMW 550i it runs better, no engine noise and 2-3 more MPG. Thanks ! -- Stephen K.

Steven K. 2010 BMW 550i Tuesday, March 8, 2016

YOUR ENGINE TREATMENT IS THE BEST VALUE FOR THE MONEY AVAILABLE IN THIS OR ANY OTHER WORLD. IT WORKED SO WELL ON MY INCURABLE INTEGRA ENGINE, I ALMOST CONSIDER IT PROOF THAT WE HAVE ALIEN TECHNOLOGY. --Peter V. (Post 1 via order notes - 04/02/2011)

THIS IS ONE OF THE GREATEST ...

PETER V. 89 ACURA WITH A HONDA B-16 ENGINE Friday, February 21, 2014
2004 silverado 5.3 v8

O ahhhhhhh mazing :) At first glance, i thought the price was a little crazy.but some in-the-know car guys that i know convinced me to give it a try, and i probably shouldn't have tried it on my only vehicle, but what the hell :D. my vehicle wasn't in bad shape (2004 silverado 5.3 ...

Stephen 2004 silverado 5.3 v8 Thursday, May 23, 2013
1996 Toyota Camry

TRY THIS IN YOUR ENGINE.........I was amazed, within 15 mins how better my engine sounded and now my car rides as good as ever........Cerma is awesome. (Facebook Post 2)

Gave the Cerma Motor treatment a try and the oil, and I must say that my car has never run better. I went from ...

Eric Dobbie '96 Toyota Camry Tuesday, July 22, 2014
2002 Ford F-150

Products Used Cerma Engine Treatment, Cerma Motor Oil:
I purchased the Diesel Engine treatment after reading about it and its possible benefits. I am so happy I did. It literally did reduce vibration within seconds of pouring it in my engine. It also slightly reduced the normal ...

Vance W. 2002 Ford F-150 Thursday, August 27, 2015
Chevy Camarom RS

I put it in the engine oil and transmission. Transmission stopped slipping on very first drive home from work. I could not believe it!

Anonymous 1991 Chevy Camarom RS with 213,000 miles on it Saturday, July 31, 2010
Intake

So here we are at 50,000 miles. Picture here is the cleanest intake valves ever seen on a GDI motor, by two EQUUS techs with 35 years experience between them. CERMA works. Way beyond anything.... Those of you contemplating its use, what are you waiting for. The SS turbo is going ...

Peter K. (aka Gaijii) From Veloster Forum -- CERMA Treatments/Oil/Lubricants: For the good of the order Sunday, November 1, 2015
Mack 350

This stuff is crazy good although I need to replace injection pump on my Mack 350. This product made the truck run the best it has done for a year. Almost made me forget the pump. Suggestions for a new pump? -- Peter P. via Amazon (Verified Purchase)

Peter P. Mack 350 Sunday, July 24, 2016
1987 Suzuki Samurai

I put Cerma Engine Treatment into our 1987 Suzuki Samurai. It completely smoothed out the idle, and improved our gas mileage by about 18% right away! Love this stuff! --Ethan M. via Facebook

Ethan M. via Facebook 1987 Suzuki Samurai Friday, June 10, 2016
2004 Ford F350 6.0

Works. 'Lil spendy but damn worked. Bought In april 2014 used in my '04 6.0 F350 4x4 an put some in my dad's dodge '05 3500 5.9 he even commented + on this, wish could afford more often tried others this works the best for me an my 6.0. Great product the Diesel fuel treatment better ...

D. Watson 2004 Ford F350 6.0 Tuesday, March 8, 2016

My name is ECS, i was introduced to your product by a friend. I spoke with John your technical analyst and asked him if this would be a good product for my car he said that indeed it would. I ordered one bottle of the Cerma Engine Treatment and used it in my car for approximately ...

Ernest Strong VW Tuesday, December 6, 2011
Alliant Energy

We have used Cerma in a gear box which is 1 of 2 identical units. The one
we treated was initially running 60 decrees hotter than the other one. We want them to
run at no more than 180 degrees. The manufacturing company tried changing out the
gears and in essence did everything ...

Eric Krahenbuhl Alliant Energy, Emery Generating Station Monday, July 16, 2012

I just want to state that other than an amazing product, this company has amazing customer service. The day after ordering my engine treatment I received a call to inform me that I did not need a full 2oz, and then they asked to change my order to a 1oz and refund a portion of my ...

Tyler Conklin 2016 Hyundai Veloster Turbo Friday, September 16, 2016
Chevy Tahoe

I came across the Cerma product when we were looking for metal protection from our hydrogen units in gas burning engines. I first tried the Cerma in my 97' Chevy Tahoe, which had over 185,000 miles prior to using it. After about 10-15 minutes on the freeway I noticed the temperature ...

Jeff-Louis 97' Chevy Tahoe wtih over over 185,000 miles Tuesday, August 10, 2010
2004 Ford Ranger

When I first went to use this product, I was a bit skeptical, I had an issue with my truck starting. I had tried every chemical to run through the gas tank claiming to "fix" rough starts, all of them failing miserably. I ran the Cerma fuel treatment through and sure enough, next day, ...

CJ 2004 Ford Ranger, 4.0L, non-turbo, 4 spd automatic 4X4 Sunday, May 3, 2015
AUD$ 130.00
CERMA ENGINE TREATMENT FOR GASOLINE OR DIESEL...
  • Save 5%
AUD$ 375.00 AUD$ 357.50
CERMA ENGINE TREATMENT DIESEL TRUCKS / SEMIS /...
AUD$ 87.00
CERMA FOR AUTOMATIC TRANSMISSIONS Cerma...
AUD$ 90.00
CERMA MOTORCYCLE TREATMENT Cerma STM-3®...
AUD$ 71.50
Cerma Blue Ice works in all A/C and Regirgeration...