• Cerma STM-3
    Technology and
    Information

    Learn More
  • Cerma Motor Oil
    Technology and
    Information

    Learn More
  • Cerma Blue Ice
    Technology and
    Information

    Learn More
16” AR-15

I must admit that I tend to view products with skepticism however the proof was in the data. I saw a legitimate 200 fps gain in a 16” AR-15 that would be the equivalent of having a 20” barrel, as well as a legitimate 150 fps boost in a 40 cal Sig P-229R. Now when cleaning time came ...

Corey Vento- Police training officer Norwalk CT Police Department Tuesday, May 7, 2013
Alliant Energy

We have used Cerma in a gear box which is 1 of 2 identical units. The one
we treated was initially running 60 decrees hotter than the other one. We want them to
run at no more than 180 degrees. The manufacturing company tried changing out the
gears and in essence did everything ...

Eric Krahenbuhl Alliant Energy, Emery Generating Station Monday, July 16, 2012
2015 Subaru Outback

Unbelievable MPG increase!! My new 2015 subaru outback 3000 miles had 27.4 miles per gallon. I added this to the oil chamber under the hood, reved the engine up to 4000 rpm's for a few minutes, then drove it hard for 30 minutes on streets and freeway mostly. It's been 8 months and ...

Jennifer V. 2015 Subaru Outback Saturday, May 28, 2016
.357 Sig Semi

I used the Cerma foam treatment in the following handguns: .44 revolver, .357 revolver.40 semi, .357 sig semi and AR 15 .223 rifle so far. I am very pleased with the results of all barrels. Next shooting session only required the use of bore snakes to clean the small amount of debris. ...

Dale W. .44 revolver, .357 revolver.40 semi, .357 sig semi and AR 15 .223 rifle Wednesday, October 7, 2015
Ford F-150

The amazing Cerma technology! The reason I say amazing is because I worked at Douglas Aircraft in the engineering changes on the DC-9 program way back in the early 1960’s and we had a Cerma type product that did two things, stopped friction and heat, the difference was that technology ...

Capt. Gary Pylant Ford F-150 Thursday, September 3, 2015

Just prior to winter in 2012, I used 1/3 an ounce of Cerma engine treatment in my 1999 Craftsman snow blower. In the past it was necessary to have the choke on and to let it run a bit before using, especially in really cold weather. Even at that, it sometimes took a couple attempts ...

Darrell Hails 1999 Craftsman 5 H.P., 22 inch Dual Stage Snow Blower, Model C950-52105-1 Thursday, October 31, 2013
Ford Escape

We drive a 2005 Ford Escape that we leased new. The sticker for mileage said 19 city 22 hwy and we got an average of 20.5. We tried the cerma with stm3 over 2 years ago and have treated the engine oil 2 oz of STM-3™ metal treatment in the transmission 2 oz, STM-3™ in the differential ...

Mike and Dea Shoars 2005 Ford Escape Saturday, March 8, 2008

I have gone through 1000 miles of engine treatment+Transmission fluid change followed by 4000 miles of Cerma oil ->Filter change -> then another 1000 miles. So I have posted on Veloster forum that I used to get 26.8 MPG at my best on 100% highway trips (cruising at 75~80mph). Here ...

Sungyoung Kim 1998 Ford Mustang V6 168,000 Miles Thursday, June 12, 2014

I've already used Cerma STM-3 Engine Treatment on 1 vehicle and plan to use this shipment to do a second. Great product, great support. I love this product, and keep buying it when I discover a friend or acquaintance who needs it too. Thanks! – Stephen Wild Post 2 (04/13/2012, ...

Stephen Wild Jeep Grand Cherokee Friday, April 13, 2012
Honda Pilot 2004 3.5L

Several tens of thousands of miles ago, I found out about Cerma Engine Treatment -- yep, I was skeptical. But talking with these wonderful folks convinced me to try it. After adding to the oil, I noticed a problem of concern: at the stop light, my car was so quiet i couldn't hear ...

John T. Honda Pilot 2004 3.5L Tuesday, February 6, 2018
1993 Mustang Motor in a 1993 Miata

My car has a 1993 mustang motor and 5 speed transmission in a 1993 miata. I put both the engine additive and the gas treatment in the car at nearly the same time. The car definitely runs more smoothly. Throttle response is much improved. Oil pressure is up 5 lbs. I am very pleased. ...

J. Dwight 1993 Mustang Motor in a in a 1993 Miata Saturday, October 5, 2013
Veloster

I'm only 2 days into the treatment with 22k miles on the odo only 100 miles driven since treated and already noticing a big difference when driving it on the highway and even in the city. I must say I've been made a believer. The car feels more normal and definitely feels like it ...

Sly4c Veloster Turbo Tuesday, February 23, 2016
Ken's Automotive Services

Cerma lubrication is an advanced metal treatment that works great to reduce heat and friction in engines , drive trains and A/C compressors. The engines, drive trains, A/C compressors we have installed it in run much quieter, smoother and cooler! We would highly recommend it to anyone ...

Ken Faurot Owner: Ken's Automotive Services Wednesday, March 7, 2012

I've tried them all and Cerma is by far the best product on the market! Better fuel economy, my engine runs smother and quieter than when I had it rebuilt, you can feel the increased power through out the power curve and I fill up less than I deed prior to treating my engine and am ...

David T 2002 Lexus RX 300 Sunday, September 7, 2014
Freightliner 12.7 Series 60 Detroit

Thank you Cerma! The day I put Cerma in my engine it smoothed out my choppy idle at 800rpm. And even today it is still getting 5.5mpg to 6.0 mpg driving to the Northwest and back to the Midwest a majority of the time. I added Cerma in at 825,000 miles, now truck has 1,016,000 miles. ...

Vincent J. Freightliner 12.7 Series 60 Detroit Monday, October 19, 2015

I just want to state that other than an amazing product, this company has amazing customer service. The day after ordering my engine treatment I received a call to inform me that I did not need a full 2oz, and then they asked to change my order to a 1oz and refund a portion of my ...

Tyler Conklin 2016 Hyundai Veloster Turbo Friday, September 16, 2016
Yanmar Tractor

I was a skeptic, but when I added the Cerma Engine Oil Treatment to my Yanmar, the change was amazing! Within 20 minutes the engine smoothed out, became much quieter, and is clearly running much better. I can pull an extra 300-400 rpm – that means more horsepower out the shaft – without ...

Chuck W. Yanmar Tractor Thursday, September 3, 2015
Mitsubishi Challenger

Hullo John,
I bought 1 bottle of Cerma STM-3 Engine Treatment and 1 bottle of Cerma STM-3 Automatic Transmission Treatment from you in May 2008. I treated my Mitsubishi Challenger(see attachment) 4x4 engine which is a 3Ltr V6 in the engine and the transmission. I followed your ...

J Wulf Mitsubishi Challenger Sunday, February 8, 2009
2015 Volvo Day Cab

I just wanted to tell you about my Volvo semi that I drive. It is a 2015 Volvo Day Cab with A/T. It now has 39,500 miles on it. I treated it at about 10K and fuel economy increased even though it was a new truck to about 4/10 mile per gallon. When the oil was changed by the company ...

Chad S. 2015 Volvo Day Cab with A/T Tuesday, September 29, 2015
2008 Ford Transit Diesel 2.4Ltr Turbo Van with 155,000km

Update from NZ on Cerma: Hello, December last year I purchased several products from you. I changed my oil ran the vehicle for a while the added Cerma. I make a regular trip up a rather steep and long hill, a 3km climb. When I purchased the diesel van it would pull up this hill ...

Glen M. 2008 Ford Transit Diesel 2.4Ltr Turbo Van with 155,000km Saturday, March 21, 2015
2000 Acura TL

Dear John: I had an appointment with Acura concerning an alignment. My 2000 Acura TL has 302,000.00 miles. As you remember from our phone conversation an application of the engine treatment gave me a very noticeable increase in gas mileage. But, also, the engine performed smoothly ...

Gerald S. 2000 Acura TL Tuesday, May 26, 2015

Purchased a 1990 Buick Reatta with 143,000 miles on it. It runs great and can only run better with the Cerma products I just purchased (Cerma Engine Value Package) and based on the success of your products in my other vehicles! 1997 Toyota Avalon, 1991 Mercedes 420SEL, 1988 Cadillac ...

Raul Y. 1990 Buick Reatta Friday, June 10, 2016

Update: 4/23/15: Rocket fuel. Just wanted to say that I have now treated all three of our autos with the Engine, trans, and power steering treatments and they are running like new, if not better than new. Keep up the good work. Now I'm going to get the air cond. treatments for ...

Brad T. Chevy Colorado Thursday, April 23, 2015

Thank you John,
It was a pleasure speaking to you on behalf of your additives.I was amazed and I'm still smiling and overwhelmed with its results. Sir it’s not every day that actual owner and inventor takes the time to speak to common folks as myself. John you made me a believer ...

Geraldo A. Colon BMW 7 Series (E65) Friday, September 12, 2014
2001 Honda Accord V6

1st attempt to test this Cerma engine treatment on my 01 Accord V6 - org 68,000mi on SEP-02 2015. Brand new Mobile 1 full synthetic oil w/ Honda genuine filter before engine treatment applied, this accord runs avg mpg 18 / 24. Engine seems quieter after 80+ miles on the road. -- ...

Spectacular Motoring 2001 Honda Accord V6 Thursday, September 3, 2015

Hi John. I decided to try Cerma and my first use was in my daughter's 2002 Mazda Tribute with about 100,000 kms on it. It was running a bit rough and mileage was low 20's per gallon. I treated it and then we went on a family trip, loaded with 4 adults and full of golf clubs and ...

Tom D. 2002 Mazda Tribute Tuesday, February 18, 2014
Toro Push Mower

GREAT product I use CERMA in EVERYTHING from my TORO push mower to both my Chevrolet vehicles with GREATLY improved gas mileage & lawn mower that runs like a "swiss watch" As long as CERMA is around I will be a Loyal customer, Thanks!

Re-posted from General Testimonials Aug 22/2010 ...

Anonymous Toro Push Mower Sunday, August 22, 2010
AUD$ 130.00
CERMA ENGINE TREATMENT FOR GASOLINE OR DIESEL...
  • Save 5%
AUD$ 375.00 AUD$ 357.50
CERMA ENGINE TREATMENT DIESEL TRUCKS / SEMIS /...
AUD$ 87.00
CERMA FOR AUTOMATIC TRANSMISSIONS Cerma...
AUD$ 90.00
CERMA MOTORCYCLE TREATMENT Cerma STM-3®...
AUD$ 71.50
Cerma Blue Ice works in all A/C and Regirgeration...